AEG DVB3850M - Инструкция по эксплуатации - Страница 3

3

ENGLISH

combustion devices or other fuels.  The hood must be 

regularly cleaned on both the inside and outside (AT LEAST 

ONCE A MONTH).  This must be completed in accor  dance 

with the maintenance instructions provided in this manual. 

Failure to follow the instruc tions provided in this user guide 

regarding the cleaning of the hood and filters will lead to the 

risk of fires.  The flaming of foods beneath the hood itself is 

severely prohibited.

1.

SAFETY INSTRUCTIONS

The use of exposed flames is detrimental 

to the filters and may cause a fire risk, 

and must therefore be avoided in all 

circumstances. 

Any frying must be done with care in order 

to make sure that the oil does not overheat 

and ignite.

 CAUTION: 

Accessible parts of the 

hood may become hot when used with 

cooking appliances.

For lamp replacement use only lamp type 

indicated in the Maintenance/Replacing 

lamps section of this manual.

 WARNING! 

Do not connect the 

appliance to the mains until the 

installation is fully complete. 

With regards to the technical and safety 

measures to be adopted for fume 

discharging it is important to closely follow 

the regulations provided by the local 

authorities.

The ducting system for this appliance must 

not be connected to any existing ventilation 

system which is being used for any other 

purpose such as discharging exhaust fumes 

from appliances burning gas or other fuels. 

Do not use or leave the hood without the 

lamp correctly mounted due to the possible 

risk of electric shocks.

Never use the hood without effectively 

mounted grids.

The hood must NEVER be used as 

a support surface unless specifically 

indicated.

Use only the fixing screws supplied with the 

product for installation or, if not supplied, 

purchase the correct screws type.

Use the correct length for the screws which 

are identified in the Installation Guide.

In case of doubt, consult an authorised 

service assistance centre or similar 

qualified person. 

 WARNING! 

Failure to install the 

screws or fixing device in accordance 

with these instructions may result in 

electrical hazards.

2.

USE

The hood serves to aspirate the fumes and 

vapors resulting from cooking.

The attached installation manual indicates 

the version to be used depending on the 

model you have, the suction version with 

external evacuation

or filtering with 

internal recirculation

.

3.

INSTALLATION

The mains power supply must correspond 

to the rating indicated on the plate situated 

inside the hood. If provided with a plug 

connect the hood to a socket in compliance 

with current regulations and positioned in 

an accessible area, after installation. If it not 

fitted with a plug (direct mains connection) 

or if the plug is not located in an accessible 

area, after installation,  apply a double 

pole switch in accordance with standards 

which assures the complete disconnection 

of the mains under conditions relating to 

over-current category III in accordance with 

installation instructions.

Warning!

Before re-connecting the hood 

circuit to the mains supply and checking 

the efficient function, always check that 

the mains cable is correctly assembled.