AEG DGE5661HM - Инструкция по эксплуатации - Страница 4

4    www.electrolux.com

air collected by the appliance is not conveyed into a duct used to 
exhaust smoke and steam from other appliances (central heating 
systems, thermosiphons, water-heaters, etc.).

• When the appliance operates with other appliances the maximum 

vacuum generated in the room should not exceed 0.04 mbar.

• Make sure not to cause damage to the mains cable. Contact our 

Authorised Service Centre or an electrician to change a damaged 
mains cable.

• If the appliance is connected directly to the power supply, the electri-

cal installation must be equipped with an isolating device that allows 
to disconnect the appliance from the mains at all poles. Complete 
disconnection must comply with conditions speci

fi

 ed in the overvol-

tage category III. The means for disconnection must be incorporated 
in the 

fi

 xed wiring in accordance with the wiring rules.

• Do  not 

fl

 ambé under the appliance.

• Do not use to exhaust hazardous or explosive materials and vapours.
• Clean the appliance regularly to prevent the deterioration of the 

surface material.

• Clean the appliance with a soft cloth regularly.
• Do not use a steam cleaner, water spray, harsh abrasive cleaners 

or sharp metal scrapers to clean the surface of the appliance. Use 
only neutral detergents.

• Clean  grease 

fi

 lters regularly (at least every 2 months) and remove 

grease deposits from the appliance to prevent the risk of 

fi

 re.

• Use a cloth or brush to clean the interior of the appliance.

2. SAFETY INSTRUCTIONS

2.1

 Installation

WARNING!

Risk of injury, electric shock, 

fi

 re,     

burns or damage to the appliance.

• Only a quali

fi

 ed person must install this 

appliance.

• Do not install or use a damaged appliance.
• Follow the installation instructions supplied 

with the appliance.

• Always take care when moving the ap-

pliance as it is heavy. Always use safety 
gloves and enclosed footwear.

• Before installing the appliance remove 

all the packaging, the labelling and the 
protective 

fi

 lm.

• Do not install the exhaust air into a wall 

cavity, unless the cavity is designed for 
that purpose.

2.2

 Electrical connection

WARNING!

       Risk of 

fi

 re and electric shock.

• All electrical connections should be made 

by a quali

fi

 ed  electrician.

• Make sure that the parameters on the ra-

ting plate are compatible with the electrical 
ratings of the mains power supply.

• If the symbol (   ) is not printed on the ra-

ting plate, the appliance must be earthed.

• Always use a correctly installed hockproof 

socket.