Вытяжки AEG DDE5980G - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
www.aeg.com
4. CONTROLS
A
B
C
D
E
F
G
H
I
I
Button Function
Led
A
PANEL CLOSED
Brief pressure: Activates the keyboard functions.
The panel opens after 1 second, the lights turn
on at maximum intensity and the motor starts
at speed one
(B)
.
The buttons turn white.
PANEL OPEN
Brief pressure: Deactivates the keyboard func-
tions.
- When pressed for 3 sec., the panel closes.
If the motor does not start the buttons switch
off after 1 minute.
MOTOR ON
Brief pressure: Motor off.
All the buttons are on.
B
Activates speed one.
The button turns from white to red.
C
Activates speed two.
The button turns from white to red.
D
Activates speed three.
The button turns from white to red.
E
Activates
INTENSIVE 1
speed for 10 minutes. At
the end of this time the system will automatically
return to the speed set before. It is disabled by
changing speed or pressing button
A
.
The button turns from white to red.
Press and hold the button for approximately 3 sec-
onds, with all the loads turned off (Motor and Lights),
to turn the Activated Charcoal Filter alarm on/off.
H
flashes 5 times.
F
Activates
INTENSIVE 2
speed for 5 minutes. At
the end of this time the system will automatically
return to the speed set before. It is disabled by
changing speed or pressing button
A
.
The button turns from white to red.
G
Activates
BREEZE
speed for 60 minutes. At the
end of this time the motor switches off. It is disabled
by changing speed or pressing button
A
.
The button turns from white to red.
H
Filter alarm button.
This button is normal off. It is only displayed
when the filter alarm is triggered. The alarm can
be reset by pressing and holding this button for
approximately 3 seconds.
Button
H
fixed (30 seconds): indicates the need
to wash the metal grease filters. The alarm is
triggered after the Hood has been in operation
for 40 working hours.
Button
H
flashing (30 seconds): indicates the
need to change the activated charcoal filters,
and also to wash the metal grease filters. The
alarm is triggered after the Hood has been in
operation for 160 working hours.
I
Press briefly: Turns the lighting system on and off
at maximum intensity.
-
Press and hold to change the lighting intensity
up or down.
-
5. LIGHTING
• For replacement contact technical support
("To purchase contact technical support").
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
