AEG DCE5960HM - Инструкция по эксплуатации - Страница 34

It is recommended to leave

the hood operating for

approximately 15 minutes

after cooking.

To operate the hood:

1. Press the first speed button 

 to

switch on the appliance.

2. If needed, press the light button   to

illuminate the cooking surface. The

light is dimmable. Press again the

button to change the intensity from:

a. Maximum,

b. Medium,

c. Low,

d. Off.

3. If needed, change the speed by

pressing the desired button.

To turn off the appliance press the first
speed button 

 again.

3.2 Hob²Hood function 

It is an automatic function which

connects the hob with a hood. Both the

hob and the hood have an infrared signal

communicator. Speed of the fan is

defined automatically on basis of mode

setting and temperature of the hottest

cookware on the hob. You can also

operate the fan using the hob manually.

The function can be activated from panel

of the hob.

For more information how to

use the function refer to the

hob user manual.

3.3 Filter notification

Filter alarm reminds to change or clean

the charcoal filter and clean the grease

filter. The filter indicator   is turned on

for 30 seconds if the grease filter must
be cleaned. The filter indicator   flashes

for 30 seconds if the charcoal filter must

be replaced or cleaned.

Refer to cleaning the grease

filter in care and cleaning

chapter.

Refer to cleaning the

charcoal filter or replacing

the charcoal filter in care and

cleaning chapter.

To activate or deactivate function:

1. To activate function press the button

 for 3 seconds.

If the function is activated, the filter
indicator   flashes two times.

2. To deactivate function press the

button   for 3 seconds.

If the function is deactivated, the filter
indicator   flashes ones.
To reset the function press the button 

for 3 seconds.

3.4 Remote-control

The appliance is supplied with a remote-

control.
The connection is originally enabled.

To connect or disconnect remote-

control:

1. Switch off the appliance.
2. Press the   for 3 seconds.

The indicator on control panel flashes

twice if function is enabled and once if

disabled.

www.aeg.com

34