Vitek VT-8282 - Инструкция по эксплуатации - Страница 5

5

 ENGLISH

• 

Do not put the operating unit on heat-sensitive or 

soft surfaces (for instance, bed or sofa) and do not 

cover the unit.

• 

Be careful! The heating plates and the unit body in the 

area of the heating plates stay hot for some time after 

the unit is unplugged.

• 

It is recommended to unwind the power cord to its full 

length while using the unit.

• 

The power cord may not:

–  touch hot objects,

–  run over sharp edges,

–  be used as a handle for carrying the unit.

• 

Check the integrity of the power cord periodically.

• 

Do not use the unit if the power cord or plug is damaged, 

if the unit works improperly or after it was dropped.

• 

Do not attempt to repair the unit. Do not disassemble 

the unit by yourself, if any malfunction is detected or 

after it was dropped, unplug the unit and apply to any 

authorized service center at the contact addresses 

given in the warranty certificate and on the website 

www.vitek.ru.

• 

To avoid damages, transport the unit in the original 

package only.

• 

Keep the unit in a dry cool place out of reach of chil-

dren and disabled persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY, 

ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION 

AREAS AND WORK SPACES IS PROHIBITED.

BEFORE THE FIRST USE

After unit transportation or storage at low tempera-

ture keep it for at least three hours at room tempera-

ture before switching on.

• 

Unpack the unit completely and remove any pack-

aging materials that can prevent the unit operation.

• 

Unwind the power cord to its full length.

• 

Check the unit for damages, do not use it in case of 

damages.

• 

Before plugging the unit in make sure that the oper-

ating voltage of the unit corresponds to the voltage 

of your mains.

IM VT-8282_70x130.indd   5

03.08.2018   10:24:25