Imetec 11144 - Инструкция по эксплуатации - Страница 8

6

GENERAL INSTRUCTIONS

DESCRIPTION Of THE APPLIANCE AND ITS ACCESSORIES

Refer to page I of the Illustrative Guide to check the contents of the package.

All the figures are on the inside pages of the cover.
1.  Heating plates

2.  On/off switch I/O

3.  Plate closing lock (if present)

4.  Temperature adjustment wheel (if present)

5.  Operation LED (if present)

6.  Power cord

7.  Technical data

8.  Display (if present)

9.  Temperature adjustment buttons (+ button 

and – button) (if present)

For the appliance features, refer to the external packaging. Use the supplied accessories only.

USEfUL TIPS

A quick understanding of how to use the hair straightener will allow you to establish the exact 

application time to achieve the desired effect on your hair.

•  Ensure your hair is dry, clean and without any trace of hairspray, hair mousse or gel.

•  Comb your hair ensuring there are no knots. Start straightening from the nape of the neck, 

proceed on the sides and finish on the forehead.

•  During  use,  when  the  plates  heat  and  cool,  position  the  appliance  on  a  smooth  and  heat 

resistant surface.

•  While straightening, be careful not to near the plates too much to the sensitive parts of the 

face, ears, neck or head.

•  Leave the plates to cool down completely when finished, before putting the appliance away.

USE

PREPARING YOUR  HAIR

•  Wash hair as normal and comb to remove knots.

•  Dry your hair and brush from the roots to the ends.

INSTRUCTIONS fOR USE 

•  Connect the power cord (6) to the mains.

•  Place the switch (2) in the ON position I.

•  The hair straightener setting, where present, varies according to the model purchased (see 

Hair Straightener Setting).

•  Take a thin lock of hair, the same width as the plate and place it between the two plates.

•  Keep the lock of hair taut with one hand and, with the other hand slide, the closed plate from 

the roots down to the ends.

•  Once you have finished styling your hair, turn the appliance off. Place the button (2) in the 

OFF position O and unplug the hair straightener from the power socket.

HAIR STRAIGHTENER SETTING M1502

•  The operation LED (5) will light up.

•  Rotate the temperature adjustment wheel (4) to set the desired temperature between 150°C 

and  210°C,  depending  on  the  type  of  hair  and  the  desired  effect;  the  temperature  can  be 

adjusted at any time by rotating the wheel (4) clockwise (to increase the temperature) or anti-

clockwise (to decrease the temperature). 

•  The operation LED (5) flashes until the plates reach the set temperature.

•  Once the temperature is reached, the operation LED (5) remains on.

HAIR STRAIGHTENER SETTING M1503-M1504

•  The display (8) lights up.

•  Select  the  desired  temperature  between  150°C  and  230°C,  depending  on  the  type  of  hair 

and the desired effect; the temperature can be adjusted at any time by pressing + or - (9).

•  After having selected the desired temperature, the button lock can be activated by pressing the 

+ button (9) for a few seconds. This function prevents accidental temperature changes while 

using the straightener. The activation of the button lock is signalled by the operation LED  

going on; The lock can be deactivated by pressing the + button (9) again for a few seconds.

•  The display (8) flashes until the plates reach the set temperature.

•  Once the temperature is reached, the display (8) remains on.

  NOTE:  steam  may  appear  while  straightening;  this  is  excess  humidity  in  the  hair 

that evaporates.

CLEANING

•  Place the switch (2) in the OFF position O and unplug the hair straightener from the power socket.

•  Wait for the heating plates (1) to cool down.

•  Clean the surface of the heating plates (1) and the handle with a soft, damp cloth.

ATTENTION! Make sure all cleaned parts are completely dry before reusing the appliance!

EN