BRAYER BR3209 - Инструкция по эксплуатации - Страница 6

6

EN

•  Wipe the unit with a clean, slightly damp cloth to 

remove dust, and then wipe it dry. 

•  Unwind the power cord to its full length while using 

the unit.

USAGE 

To achieve good results, wash your hair with shampoo, 

wipe with a dry towel, dry with a hairdryer and comb it. 

After that you can curl your hair.
•  Divide the hair into locks 4-5 cm wide.

• 

Put the unit on the safety stand (3) on a flat heat-

resistant surface.

•  Insert the power plug into the mains socket.

•  Switch the unit on by setting the power switch (6) to 

the position «ON», the light indicator (5) will light up.

•  Wait for some time until the operating surface (2) 

heats up.

•  Take a hair lock with the free hand.

•  Press the clamp handle (4) with the other hand, 

place the end of the hair lock on the operating 

surface (2) and release the clamp handle (4). 

Holding the tip (1) and the handle (7), wind the lock 

around the operating surface (2).

•  Wait for a while, then press the clamp handle (4) 

and release the hair lock.

•  Repeat this procedure on the rest of your hair.

• 

Notes:

 -

when using the unit for the first time, a foreign 

smell from the heating element can appear — this 

is normal and it is not covered by warranty.

 - avoid contact of hot surfaces of the unit with your 

face, neck and other parts of your body during the 

unit operation.

 - during breaks in operation, place the unit on the 

safety stand (3) on a flat heat-resistant surface.

 - do not comb the hair right after curling it, let it 

cool down, hair spray should be applied after hair 

curling.

• 

After finishing the unit operation, switch the unit 

off by setting the power switch (6) to the «OFF» 

position, and unplug the unit.

• 

Put the unit on the safety stand (3) on a flat heat-

resistant surface and let it cool down completely.

CLEANING AND  MAINTENANCE

•  Before cleaning unplug the unit and let it cool down 

completely.

•  Do not immerse the unit, power cord and power 

plug into water or any other liquids.

•  Do not use detergents, abrasives or any solvents to 

clean the unit.

•  Wipe the unit body with a soft, slightly damp cloth 

and then wipe it dry.