Ryobi RBV1850 - Инструкция по эксплуатации - Страница 6

4

| English

ADDITIONAL BATTERY SAFETY 

WARNINGS

 WARNING

To reduce the risk of 

fi

 re, personal injury, 

and product damage due to a short circuit, 
never immerse your tool, battery pack or 
charger in 

fl

 uid or allow a 

fl

 uid to 

fl

 ow inside 

them. Corrosive or conductive 

fl

 uids,  such 

as seawater, certain industrial chemicals, 
and bleach or bleach-containing products, 
etc., can cause a short circuit.

Turn off the product, remove the battery pack, 
and allow it to cool down before storing or 
transporting.

■

Clean all foreign materials from the product. 
Store the product in a cool, dry, and well-
ventilated place that is inaccessible to 
children. Keep away from corrosive agents, 
such as garden chemicals and de-icing 
salts. Do not store the product outdoors.

■

For transportation in a vehicle, secure the 
product against movement or falling to 
prevent injury to persons or damage to the 
product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery pack in accordance with 
local and national provisions and regulations.
Follow all special requirements on packaging 
and labelling when transporting batteries by a 
third party. Ensure that no batteries can come 
in contact with other batteries or conductive 
materials while in transport by protecting 
exposed connectors with insulating, non-
conductive caps or tape. Do not transport 
battery packs that are cracked or leaking. 
Check with the forwarding company for further 
advice.

 WARNING

Use only original manufacturer’s 

replacement parts, accessories, and 

attachments. Failure to do so can cause 

possible injury, can contribute to poor 

performance, and may void your warranty.

 WARNING

Servicing requires extreme care and 

knowledge and should be performed only by 

a quali

fi

 ed service technician. For service, 

have the product serviced by an authorised 

service centre only. When servicing, use 

only original replacement parts.

Do not make adjustments and repairs not 
described in this manual. For other repairs, 
contact an authorised service centre

.

■

After each use, clean the product with a 
soft, dry cloth.

■

Check all nuts, bolts, and screws at 
frequent intervals for proper tightness to 
ensure that the product is in safe working 
condition. Any part that is damaged should 
be properly repaired or replaced by an 
authorised service centre.

■

Bring the product to an authorised service 
centre to replace damaged or unreadable 
labels.

CLEARING A BLOCKAGE

■

To reduce the risk of injury associated with 
contacting rotating parts, always turn off 
the product, remove the battery pack, and 
make sure all moving parts have come to a 
complete stop.

■

Remove the blower tubes to inspect for 
blockage. Clear the tubes if required.

■

Remove the debris collector bag. Check 
that the bag adaptor is free from obstruction.

■

Inspect the opening to the fan enclosure 
and the tube to the debris bag for evidence 
of a blockage. Remember, even though 
the battery pack is removed, the fan or 
mulching blades may move as you clear 
any blockage. Keep fingers away from the 
fan or mulching blades at all times.

■

Do not attempt to remove the fan or 
mulching blade. If it is necessary to remove 
the fan or mulching blades, bring the 
product to an authorised service centre.

■

Reinstall the tubes and the debris collector 
bag before installing the battery pack and 
starting the product.