Воздуходувки AL-KO Blower Vac 2400 E - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GB
Translation of original user instructions
18
Blower vac
Operation
Use for the first time
Warning!
Do not use the machine until it has been fully
assembled.
The plug and socket on extension leads must be
made of rubber, plasticized PVC or other thermo-
plastic material with the same mechanical strength,
or be clad in this material
The extension lead must not be to a lower specifi-
cation than:
light-duty rubber sheathed cable H05 RN-F
to VDE 0282 part 8
sheathed cable with polyurethane cladding
to VDE 0282 part 10
Keep children away from the machine whilst it is
plugged into the mains
Plug the machine only into mains sockets that are
protected with a residual-current device (RCD) with
a triggering current of max. 30 mA
The plug connectors of extension leads must be
splash-proof
Do not remove any protection devices
Transport
Warning – risk of damage!
Do not unplug the machine by pulling on the
power cable.
Unplug it by grasping the plug to withdraw it!
When carrying the machine always hold it by the
handle or carrying strap
Do not use the rollers for transporting the machine
Operation
Warning – risk of injury!
Do not operate the machine without a collection
sack.
Close the zip on the collection sack..
The blower-vac will not work unless the sack
frame is attached to the housing
(safety switch).
Regularly check the power cable and extension
leads for signs of damage; use them only if they are
in faultless condition!
If a cable is damaged in use, immediately discon-
nect it from the mains!
1. Plug the mains plug into the extension lead socket.
2. Secure extension lead by inserting it into the strain
relief (
12, 13
).
3. Plug the extension lead plug into the mains socket.
Switching on
Press the ON / OFF switch in and keep it pressed.
Switching off
Release the ON / OFF switch
Selecting the operating mode
The operating mode is selected using the changeover
lever:
(
15, 16
)
Move the changeover lever to position :
- Sucking mode is selected
Move the changeover lever to position :
- Blowing mode is selected
The operating mode can be selected when the motor is
running or when it its stopped.
Setting the sucking / blowing power
(
17
)
(only for Blower Vac 2400 E speed control)
Turn the speed controller clockwise:
- sucking / blowing power is increased
Turn the speed controller anti-clockwise:
- sucking / blowing power is decreased
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
