PHILIPS AWH1601/51(50DA) - Инструкция по эксплуатации - Страница 15

13

Setting the water heating temperature

During heating, water may start to drip 

from the opening of the safety valve  

Water leakage cannot be avoided and 

must not be prevented, since blocking the 

valve can lead to rupture of the internal 

tank (in the event of an equipment failure) 

Thermometer

Models of the series are equipped with a 

thermometer (Fig  6) that displays the current 

level of water heating in the internal tank 

fig  

6

1   The temperature of the water in the water 

heater can be set between +30 and +75 °C 

2   

Turning the thermostat knob clockwise 

increases the water heating temperature 

3  

Turning the thermostat knob 

counterclockwise reduces the water heating 

temperature 

4   The water heater automatically maintains 

the water temperature  When the water 

temperature inside the water heater 

reaches the temperature set by the user, the 

heating  is  automatically  turned  off,  while 

the «Heating» indicator on the control panel 

goes out, and the «Warm» indicator lights 

up  When the temperature of the water 

inside the water heater drops to a certain 

level, the heating automatically turns on, 

while the «Heating» indicator on the control 

panel lights up, and the «Warm» indicator 

goes out 

5   By setting the thermostat knob to the 

“Optimal TEMP” position, you activate 

the mode that corresponds to the most 

comfortable water heating temperature 

(+55  °С  (

±

2)),  as  well  as  the  most  efficient 

power consumption mode 

Shutdown 

To  turn  off  the  water  heater,  turn  the 

thermostat knob to the « » position  The 

water heater will stop working 
It is recommended to always disconnect the 

water heater from the electrical mains if you 

do not plan to use the appliance for some 

time 

Attention!