Водонагреватели Gorenje TGU50V6 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
7
Dear buyer, we thank you for purchase of our product.
Prior to installation and first use of the electric water heater, please carefully read
these instructions.
THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN)
WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LACK OF
EXPERIENCE AND KNOWLEDGE, UNLESS THEY HAVE BEEN GIVEN SUPERVISION OR
INSTRUCTION CONCERNING USE OF THE APPLIANCE BY PERSON RESPONSIBLE
FOR THEIR SAFETY.
CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH
THE APPLIANCE.
This water heater has been manufactured in compliance with the relevant standards and tested by
the relevant authorities as indicated by the Safety Certificate and the Electromagnetic Compatibility
Certificate. The technical characteristics of the product are listed on the label affixed between the inlet
and outlet pipes. The installation must be carried out by qualified staff. All repairs and maintenance
work within the water heater, e.g. lime removal or inspection/replacement of the protective anticorrosion
anode, must be carried out by the authorised maintenance service provider.
BUILDING-IN
The water heater shall be built-in as close as possible to the outlets. When installing the water heater
in a room with bat htub or shower tub, take into account requirements defined in IEC Standard 60364-
7-701 (VDE 0100, Part 701). It has to be fitted to the wall using appropriate rag bolts with minimum
diameter of 8 mm. The wall with feeble charging ability must be on the spot where the water heater shall
be hanged suitably reinforced. Due the universal construction the waterheater it can be fixed vertically
on the wall or horizontally on the wall (output pipes must be on the left). We recommend the distance
between the water heater and the ceiling is large enough to allow simple replacement of the MG anode
(see dimension G in the Installation Drawing), in order to avoid unnecessary dismounting of the heater
during the servicing intervention.
TECHNICAL PROPERTIES OF THE APPLIANCE
Type
TG 50 N
TG 80 N
TG 100 N
TG 120 N
TG 150 N
TG 200 N
Model
TGU 50 N
TGU 80 N TGU 100 N TGU 120 N TGU 150 N TGU 200 N
Volume [ l ]
50
80
100
120
150
200
Rated pressure [MPa ]
0,6
Weight / Filled with water [kg]
24/74
30/110
34/134
38/158
44/194
65/265
Anti-corrosion protection of tank
Enameled/Mg Anode
Connected power [ W ]
2000
Voltage [V
~
]
230
Heating time to 75°C
1)
[ h ]
1
55
3
05
3
55
4
35
5
45
7
40
Quantity of mixed water at 40°C [ l ]
95
146
193
226
282
360
Energy consumption
2)
[kWh/24h] 1,32/1,45 1,85/2,10 2,20/2,45 2,60/2,90 3,20/3,60 2,80/3,10
1) Time for heating of the whole volume of heater with electric immersion heater by entering temperature of
cold water from water supply 10°C.
2) Energy consumption to maintain stable temperature of water in the water heater 65°C at surrounding
temperature 20°C, measured according to SIST EN 60379.
EN
