Fulgor Milano FWC 4522 TC X - Инструкция по эксплуатации - Страница 28

28

GB

TEMPERATURE SETTING
For Single Zone

•  The temperature setting range is 5-22 ºC (41-72 ºF).
•  Directly touch the 

 or 

 mark to set the wine cooler temperature as you want.

•  The first touch on 

 or 

 mark will recall the previous set temperature displayed in the digital 

window. If the appliance runs after a power failure (or unplugging), the previous set temperature 
does not exist and is replaced by the defaulted temperature at 12ºC.

•  Touch the mark 

 to increase the set temperature by 1ºC. On the contrary, touch the mark 

 to 

decrease the set temperature by 1ºC.

•  The digital will change to display the real temperature of the inside cabinet after 

10 seconds

without being touched.

Note:

 For the first time to use the appliance or to restart the appliance after having been shut off for 

a long time, you may find a few degrees variance between the set temperature and the displayed 
temperature. It is normal and everything of the appliance will be in the order after a few hours running

SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
For Single Zone

Touch the marks 

 with 2 fingers at the same time and hold for 5 seconds, you can interchange 

the Fahrenheit and Celsius display. 

For Dual Zone

Directly touch the mark 

, you can interchange the Fahrenheit and Celsius display for both zones at 

the same time.

CARE AND MAINTENANCE

CLEANING THE WINE COOLER

•  Turn off the power, unplug the appliance, and remove all items.
•  Wipe the inside surfaces with a sponge and baking soda solution. The solution should be about 2 

tablespoons of baking soda to a quart (approx. 1 litre) of warm water.

•  Wash the shelves with a mild detergent solution. Allow wooden shelves to dry.
•  Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical 

parts.

•  Wipe the outside cabinet with warm water and mild liquid detergent. Wipe dry with a clean soft 

cloth.

•  Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless 

steel with steel particles and rusting may occur.