Видеорегистратор Navitel R200 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
19 |
USER MANUAL
EN
Device functions
Video
Connect the device to an external power supply and it will start recording automatically. Press the
button to stop recording. Press OK again to record another video. Each video will be saved automatically.
Photo
In
Video Record
mode, press
button to enter
Capture
mode, press the
button to take a
photo (it will be saved automatically).
Playback
In
Video Record
mode, press
button twice to enter
Playback
mode; press
buttons to
select a file; press the
button to play a file. During playback, press OK to pause/unpause.
Lock file
In
Playback
mode, select a file, press
and select Protect, then Lock Current or Lock All. Protected-
files cannot be deleted or overwritten. Select Unlock Current / Unlock All to remove protection.
Loop recording
This setting allows saving the recording in separate files every few minutes. For example, if set to 5
minutes, 1 hour of footage will be saved as 12 five minute fragments. If the memory card is full, all
unprotected files will be overwritten in the order they were created.
G-sensor
If the vehicle is hit by something, the DVR will automatically lock the current video.
Parking monitor
In shutdown state, if vibration is detected, the device will turn on automatically and start recording. The
file will be protected (locked). If nothing happens for over a minute, the device will shut down.
Stamp
This function adds date stamp to the record.
