Dunobil Spiegel Saturn (DBNC760) - Инструкция по эксплуатации - Страница 6

10

11

2 . Manual recording

Short press 

[ ]

 button, the camera will start recording. Long 

press 

[ ]

 button 3 seconds, the camera will save current vid-

eo then shut down. 

3 . Take photo function

Under standby mode, short press 

[M]

 button to enter into 

photo mode, meanwhile the icon in left top of the screen 

change to camera. Then short press 

[OK] 

button to take a 

photo. Short press 

[M]

 button 3 times can change the camera 

to recording mode. 

4 . Motion detection

Under standby mode, choose “Motion detection” option in 

“ADAS” to enter into motion detection. When lens sensor 

something around is moving, the camera will start recording. 

When lens sensor nothing around is moving last 1 minute, 

the camera will stop recording. Users can long press down 

button 3 seconds under standby mode to exit motion detec

-

tion.

[Attention] The system will not keep this setting, the 

camera will enter into recording mode directly after you 

restart the camera .

5 . Lane departure warming (LDWS)

Under standby mode, press 

[M]

 button to enter into setting, 

short press 

[ ]

 and 

[ ]

 button to lane departure warning op-

tion, start this function then short press 

[OK]

 to confirm start 

it. Short press 

[M]

 button switch the camera to system set-

ting mode, short press 

[ ]

 and 

[ ]

 button to lane departure 

warming  alignment  to  adjust  the  horizon,  then  short  press 

[OK]

 to confirm and back to setting mode, press 

[M] 

button 

again back to standby mode. The camera will show lane de-

part icon in the middle of the screen and beeps when lens the 

car depart the lane.

6 .Forward collision warming (FCWS)

Under standby mode, press 

[M]

 button to enter into setting, 

short press up and down button to forward collision warn-

ing option, start it then press 

[OK]

  to  confirm  the  setting. 

Then the camera will monitor the situation within 50 Meters 

in front of your car, when the car is too close with front car 

or there is people in front of the car, the camera will beep to 

remind the driver. 

[Attention] The system will keep the setting of this 

function, users do not need reset it when restart the 

camera .

7 . G-sensor

G-sensor is built in this camera, when there is a crash, the 

camera will lock the video which recorded between 5 sec-

onds before the crash and 10 seconds after the crash, mean-

while there is a lock icon in the left down corner in the display. 

The locked video will be stocked as a special file and wont be 

deleted by cyclic recording.