BLACKVUE DR900X-2CH - Инструкция по эксплуатации - Страница 14

14

BLACKVUE

Connectivity Module (Optional): Connect the connectivity module to the front 
camera and attach it to the edge of the window. Use the pry tool to tuck in the 
cable.

Plug the cigarette lighter power cable into the cigarette lighter socket and the 
front camera. Skip to 

 for Hardwiring Power Cable setup.

Use the pry tool to lift the edges of the windshield trim/molding and tuck in the 
power cord.

Power cord

Rear camera connection cable

Turn on the engine. The BlackVue dashcam will power up and start recording. 
Video files are stored on the microSD card. 

Turn off the engine. The dashcam will automatically stop recording and power 
down. To record in parking mode while the engine is off please connect the 
Hardwiring Power Cable (included in the box) or install a Power Magic Battery 
Pack (sold separately). A Hardwiring Power Cable uses the automotive battery 
to power your dashcam when the engine is off. A low voltage power cut-off 
function and a parking mode timer to protect the automotive battery from 
discharge is installed in the device. Settings can be changed in the BlackVue App 
or Viewer.

Locate the fuse box to connect the hardwiring power cable.

Note

Location of the fuse box differ by manufacturer or model. For details, refer to the 
vehicle owner's manual.