Sony CCD-TR918E - Инструкция по эксплуатации - Страница 69

69

C

us
tomizing Your C

amc

order

Выполнение индивидуальных установок на видеокамере

Ch a n g i n g  t h e  m e n u  se t t i n g s

Icon/ it em

REC M ODE

ORC TO SET

ORC stands for “Optimizing the Recording Condition”.

q

REM AIN

M ode

z

SP

LP

z

AUTO

ON

M eaning

To record in SP (Standard Play) mode

To increase the recording time to twice the SP mode

To automatically adjust the recording condition to
get the best possible recording. Press START/STOP
to start adjustment. Your camcorder takes about 10
seconds to check the tape condition and then
returns to the standby mode.

To display the remaining tape bar:

• for about 8 seconds after your camcorder is

turned on and calculates the remaining amount
of tape

• for about 8 seconds after a cassette is inserted and

your camcorder calculates the remaining amount
of tape

• for about 8 seconds after 

N

 is pressed in

PLAYER mode

• for about 8 seconds after DISPLAY on the Remote

Commander is pressed to display the viewfinder
screen indicators (CCD-TR427E/TR617E/
TR717E/TR918E only)

• for the period of tape rewinding, forwarding or

picture search in the PLAYER mode

To always display the remaining tape bar

POW ER
sw it ch

 CAMERA

 PLAYER
 CAMERA

 CAMERA

Not es on t he LP mode

• When you record a tape in the LP mode on your camcorder, we recommend playing the tape on your

camcorder. When you play back the tape on other camcorders or VCRs, noise may occur in pictures
or sound.

• Noise may occur also when you play on your camcorder tapes recorded in the LP mode on other

camcorders or VCRs.

Not es on ORC set t ing

• Each time you eject the cassette, the ORC setting will be canceled. If necessary, reset the setting.
• You cannot use this setting on a tape with the red mark on the cassette exposed.

(i. e. the tape is write-protected)

• When you set ORC TO SET, a non-recorded section of about 0.1 seconds appears on the tape.

However, note that this non-recorded section disappears from the tape when you continue recording
from this section.

• To check if you have already set the ORC setting, select ORC TO SET in the menu settings.  “ORC

ON” is displayed if ORC TO SET is already set.