Sony CCD-TR748E - Инструкция по эксплуатации - Страница 87

87

T

roubles

hoot

ing

Поиск 

и 

устранение 

неисправностей

Ot h e r s

Sympt om

Cause and/ or Correct ive Act ions

• Your VCR and/or video camera recorder is not set correctly.

c

Make sure the input selector of the VCR is set to LINE.

Also, make sure the power switch of the video camera is set

to VTR/VCR. (p. 63 to 71)

• The IR SETUP code or PAUSE MODE is not set correctly.

c

Select the correct IR SETUP code and PAUSE MODE,

according to your VCR. Then confirm VCR operation with
the IR TEST function. (p. 63 to 71)

• COMMANDER is set to OFF in the menu settings.

c

Set it to ON. (p. 78)

• Something is blocking the infrared rays.

c

Remove the obstacle.

• The batteries inserted in the battery holder with the + –

polarities incorrectly matching the + – marks.

c

Insert the batteries with the correct polarity. (p. 117)

• The batteries are dead.

c

Insert new ones. (p. 117)

• Set the date and time. (p. 21)

• Moisture condensation has occurred.

c

Remove the cassette and leave your camcorder for at least

1 hour to acclimatize. (p. 103)

• Some troubles have occurred in your camcorder.

c

Remove the cassette and insert it again, then operate your

camcorder.

• Disconnect the mains lead of the AC power adaptor or remove

the battery pack, then reconnect it after about 1 minute. Turn
the power on (p. 15, 19). If the functions still do not work, press

the RESET button using a sharp-pointed object. (If you press

the RESET button, all the settings including the date and time

return to the default.) (p. 115)

• The AC power adaptor is disconnected.

c

Connect it firmly. (p. 15)

• The battery pack is not installed properly.

c

Install it properly.

• Something is wrong with the battery pack.

c

Contact your Sony dealer or local authorised Sony service

facility.

• The POWER switch is not set to OFF (CHG).

c

Set it to OFF (CHG).

Ty p e s o f  t r o u b l e  a n d  t h e i r  so l u t i o n s

The Remote Commander supplied

with your camcorder does not work.

The melody or beep sounds for

5 seconds.

The date or time indicator does not

appear, and the bars “- - : - - : - -”

appears.

While charging the battery pack, no

indicator appears or the indicator

flashes in the display window.

No function works though the power

is on.

You cannot charge the battery pack

installed to your camcorder.

Easy Dubbing does not function.