Tanita BC-730 - Инструкция по эксплуатации - Страница 4

2

To ensure accuracy, readings should be taken without clothing and under consistent 
conditions of hydration. If you do not undress, always remove your socks or 
stockings, and be sure the soles of your feet are clean before stepping on the 
measuring platform.
Be sure that your heels are correctly aligned with the electrodes on the measuring 
platform. Don’t worry if your feet appear too large for the unit accurate readings can 
still be obtained if your toes overhang the platform. 
It is best to take readings at the same time of day. Try to wait about three hours after 
rising, eating, or hard exercise before taking measurements.
While readings taken under other conditions may not have the same absolute 
values, they are accurate for determining the percentage of change as long as the 
readings are taken in a consistent manner. To monitor progress, compare weight 
and body fat percentage taken under the same conditions over a period of time.

Note:  

An accurate reading will not be 
possible if the soles of your feet are 
not clean, or if your knees are bent or 
you are in a sitting position.

Heels centered on 

electrodes

Toes may overhang 

measuring platform

Handling Tips

This monitor is a precision instrument utilizing state-of-the-art technology.
To keep the unit in the best condition, follow these instructions carefully:

•฀Do฀not฀attempt฀to฀disassemble฀the฀measuring฀platform.

•฀Store฀the฀unit฀horizontally,฀and฀place฀it฀so฀that฀the฀buttons฀will฀not฀be฀pressed฀accidentally.

•฀Avoid฀excessive฀impact฀or฀vibration฀to฀the฀unit.

•฀Place฀the฀unit฀in฀an฀area฀free฀from฀direct฀sunlight,฀heating฀equipment,฀high฀humidity,฀or฀extreme฀temperature฀change.

•฀Never฀submerge฀in฀water.฀Use฀alcohol฀to฀clean฀the฀electrodes฀and฀glass฀cleaner฀(applied฀to฀a฀cloth฀first)฀to฀keep฀them฀shiny;฀avoid฀

soaps.

•฀Do฀not฀step฀on฀the฀platform฀when฀wet.

•฀Do฀not฀drop฀any฀objects฀onto฀the฀platform.

Note: To avoid possible injury, do not step on the edge of the platform.

 Inserting the Batteries

Open the battery cover on the back of the measuring platform. Insert the supplied  
AA-batteries as indicated. 

Note:  

Be sure that the polarity of the batteries is set properly. If the batteries are incorrectly 
positioned the fluid may leak and damage floors. If you do not intend to use this 
unit for a long period of time, it is advisable to remove the batteries before storage.

Please note that the included batteries from factory may have decreased energy levels over 
time.

 Positioning the Monitor

Place the measuring platform on a hard, flat surface where there is minimal vibration to 
ensure safe and accurate measurement.

PREPARATIONS BEFORE USE

GETTING ACCURATE READINGS

AUTOMATIC SHUT-DOWN FUNCTION

The automatic shut-down function shuts off the power automatically in the following cases:

•฀If฀you฀interrupt฀the฀measurement฀process.฀The฀power฀will฀shut฀down฀automatically฀within฀30฀seconds฀depending฀upon฀the฀type฀of฀

operation.

•฀During฀programming,฀if฀you฀do฀not฀touch฀any฀of฀the฀keys฀or฀buttons฀within฀60฀seconds.*

•฀After฀you฀have฀completed฀the฀measuring฀process.