Весы Qardio Base 2 B200-IAW - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
36
Cet équipement est conforme aux limites d’exposition aux rayonnements
ISED établies pour un environnement non contrôlé. L’utilisateur final doit
suivre les instructions spécifiques pour satisfaire les normes. Cet émetteur
ne doit pas être co-implanté ou fonctionner en conjonction avec toute
autre antenne ou transmetteur.
Le dispositif portatif est conçu pour répondre aux exigences d’exposition
aux ondes radio établie par le développement énergétique DURABLE.
Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme
de tissu. La valeur SAR la plus élevée signalée en vertu de cette norme
lors de la certification de produit à utiliser lorsqu’il est correctement porté
sur le corps.
RF Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and
operated with minimum distance 0 cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Medical Electrical Equipment needs special precautions regarding EMC
and needs to be installed and put into service according to the EMC
information provided in the following section.
Interference may occur in the vicinity of equipment marked with the
following symbol
.
Portable and mobile RF communication equipment (e.g. cell phones) can
affect Medical Electrical Equipment. The use of accessories and cables
other than those specified may result in increased emissions or decreased
RF STATEMENT
immunity.
The device uses RF energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any interference in
nearby electronic quipment.
The device is suitable for use in all establishments, including domestic
establishments and those directly connected to the public low voltage
power supply network that supplies buildings used for domestic
purposes.
Portable and mobile RF communications equipment should be used no
closer to any part of the device, including cables, than the recommended
separation distance calculated from the equation applicable to the
frequency of the transmitter.
The device is intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled. Any other accessories,
transducers and cables may result in increased emissions or decreased
immunity and EMC performance.
The device should not be used adjacent to or stacked with other
equipment and if adjacent or stacked use is necessary, it should be
observed in order to verify normal operation in the configuration in which
it will be used.
Medical Electrical Equipment needs special precautions regarding EMC
and needs to be installed and put into service according to the EMC
information provided in the following. Portable and mobile RF
communication equipment (e.g. cell phones) can affect Medical Electrical
Equipment. The use of accessories and cables other than those specified
may result in increased emissions or decreased immunity of the unit.
