First FA-8006-3 - Инструкция по эксплуатации - Страница 3

4

5

ENGLISH

ENGLISH

OPTIONAL NORMAL WEIGHING MODE

(by passing parameter setting)

Auto step on weighing

1.

2.

3.

4.

1.  Install battery and place the 

scale on flat floor 

2.  Step on the weighing platform

3. Display your weight

4.  Digits flash, stabilized and 

locked

WARNING INDICATIONS

Low Battery Indication

The battery power is running low, please replace with a new battery.

Over-load Indication

The weighing subject on the platform exceeds the maximum capability of scale. Please 

step off to avoid damage.

Low Fat% Indication

The Fat% is too low. Please lead a more nutritional diet and take good care of yourself.

High Fat% Indication

The Fat% is too high. Please watch your diet and do more exercise.

Re-test

Error exists, please re-test to get the correct result.

FAT/HYDRATION/CALORIE MEASURING MODE

(1) Setting personal parameters

1.  At the first time when you install battery and switch on, all default parameter are set as follow:

Memory Gender 

 Height 

  Age

1   

Male 

165cm/5‘05.0“ 

25

2.  Parameters can be set in the following range:
 

Memory Gender 

 Height 

  Age

1~12   

male/female 

100~250cm/3‘03.5“~8‘02.5“ 

10~100

3.  Parameter setting

Power off

Press SET

 (ON/SET) to 

switch on

Press    

to select 

user code

Default 

parameters

Press SET (ON/

SET) to confirm 

and prompt to 

next setting

Press SET (ON/

SET) to confirm

 and prompt to 

next setting

Press  

to select 

gender

Press   

to set height

Press SET (ON/

SET) to confirm

 and prompt to 

next setting

Press  

to set age

Tap on the 

scale platform

LCD shows „0.0“

Auto off after several seconds

Power off

Example: the 3rd user, female, 

168cm, 28 years old, can set her 

parameters as follow:
NOTE:

•  During parameter setting, if idle 

for 6 seconds, the parameters 

already set will be memorized 

automatically and LCD shows 

„0“, meaning body fat measuring 

will be started.

•  If LCD prompt to show „0“ 

during parameter setting, press 

SET (ON/SET) for 3 seconds 

to return setting mode, then 

you can set user code, gender, 

height and age

(2) To Start Measuring 

Power off

Press SET

(ON/SET) to 

switch on

Show parameters of 

the last user or default 

parameters

Press   

to select user code 

or reset parameters

Tap on the 

scale platform

LCD shows „0.0“

Step onto weighing 

platform gently 

(both feet touching 

with metal 

electrodes)

Wait until the digits 

stabilize

Weight readings 

locked and flash once

Measuring...

Measured results (Repeat for 3 times): 

Weight: 52.8kg, Fat status, Fat 23.8%, Fat status i, Hydration 52.3%,  

BMI 20,0, 

Calorie 1840.

Shut down automatically

(Make sure 

your feet are 

touching with 

metal 

electrodes on 

the scale 

platform, or 

body fat can 

not be 

measured.)

To ensure 

accuracy, 

please remove 

your shoes & 

socks before 

stepping on. 
Example: 

the 3rd user, 

female, 168cm, 

28 years old 

can measure 

as follow: