Beurer GS 280 BMI Genius - Инструкция по эксплуатации - Страница 10

10

5. Initial use

Inserting the batteries (2 x 3V CR2032)

Please remove the battery insulating strips and/or position the batteries correctly with regards to 

the polarity displayed in the battery compartment. If the scale fails to operate, remove the batteries 

completely and reinsert them.

Changing the weight unit

The scale shows the values in kg. You can set the device to measure in kilograms ('kg'), pounds ('lb') 

and stones ('st') using the button on the back of the device.

Setting up the scale

Set up the scale on a level and solid surface. A solid surface is a prerequisite for a correct

measurement.

6. Information

The measuring principle

The BMI is calculated using the height value entered and the measured weight value.

General tips

• If possible, always weigh yourself at the same time of day (preferably in the morning), after using

  the toilet, on an empty stomach and unclothed, in order to achieve comparable results.

7. Weight measurement

Step onto the scale. Stand still with your weight distributed equally on both feet. The scale begins to 

take measurements straight away. After flashing twice, the weight is established. 

If you step off the weighing area, the scale switches off after a few seconds.

8. Weight and BMI display

Setting user data

The scale has 10 user memory spaces. You and, for example, the members of your family can save 

and later access the following personal settings in the user memory spaces:

Sequence

User data

Parameters

1

Memory position

P-0 to P-9

2

Body height

80 to 240 cm (2'-07" to 7'-10")

•  Press the "SET" button until you have reached the desired memory space (P-0 – P-9). Confirm 

using the "SET" button. First, the default height value will be displayed.

•  Press the buttons   and   to set your height. Keep the button pressed to scroll quickly (P-0 – 

P-9). 

• Finish entering data by pressing the "SET" button.

  Please note: If you change your height setting at a later point in time, the saved 

measurement (weight and BMI) in your user memory will be deleted.

Weighing yourself and calculating BMI

To weigh yourself and to calculate your personal body mass index:

•   Using the "SET" button, select the user memory space where your settings have been saved. Your 

saved height value will be displayed. The selected user memory flashes at the same time. The last 

measurement (weight and BMI) is then displayed.