Beurer BF 850 - Инструкция по эксплуатации - Страница 18

18

8. Take measurement 

8.1 Diagnostic functions

Step onto the scale 

with bare feet

 and ensure that you are standing still with equal 

weight distribution and with both legs on the electrodes

   Note:

 The measurement result will be incorrect if the measurement is taken with 

socks on.

The scale begins to take measurements straight away. 
First, the weight is displayed.

During the BIA analysis, “

” is displayed.

If a user was assigned, their initials will be displayed and all of the following values will 

be saved.

1. BMI

2. Body fat in % 

3. Body water in % 

4. Muscle percentage in % 

5. Bone mineral amount in kg 

6. Basal metabolic rate in kcal (BMR)

7. Active metabolic rate in kcal (AMR)

   Note: 

If the user is not recognised, then the user assignment (initials) is missing 

and only the weight can be displayed. The measured values will not be saved. 

This happens if your measured weight differs from the previous measurement 

by ± 3 kg or if another user has similar values (± 3 kg) to yours. In this case, 

repeat the measurement by turning on the scale and pressing the “ ” button to 

select your user memory (

P-01 

–

 P-08

). Repeat the measurement.

8.2 Weight

Step onto the scale 

wearing shoes

 and ensure that you are standing still with equal 

weight distribution and with both legs on the scale. The scale begins to take meas-

urements straight away.

First, the weight is displayed.

“ ” will briefly be displayed on the LCD. A BIA analysis is not possible. 

If a user was assigned, their initials will be displayed and the weight will be saved.

   Note: 

If the user is not recognised, then the user assignment (initials) is missing 

and only the weight can be displayed. The measured values will not be saved. 

This happens if your measured weight differs from the previous measurement 

by ± 3 kg or if another user has similar values (± 3 kg) to yours. In this case, 

repeat the measurement by turning on the scale and pressing the “ ” button to 

select your user memory (

P-01 

–

 P-08

). Repeat the measurement.