Вентиляторы Scarlett SC-SF111B21 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
IM021
SC-SF111B21
7
Қорғау шілтерді, қалақтарды, тіректі және
негізді дымқыл жұмсақ матамен және құрғақ
содалы сумен сүртіңіз.
Абразивті тазалайтын заттарды қолданбаңыз.
САҚТАУ
Құрғақ орналастыруда нормалы шарттар
жанында бұйымды сақтаңыздар.
Өнімдегі,
қораптағы
және/немесе
қосымша
құжаттағы
осындай
белгі
қолданылған электрлік және электрондық
бұйымдар кәдімгі тұрмыстық қалдықтармен
бірге шығарылмауы керек дегенді білдіреді.
Оларды арнайы қабылдау бөлімшелеріне
өткізу қажет.
Қалдықтарды жинау жүйелері туралы қосымша
мәліметтер алу үшін жергілікті басқару
органдарына хабарласыңыз.
Қалдықтарды дұрыс кәдеге жарату бағалы
ресурстарды сақтауға және қалдықтарды
дұрыс
шығармау
салдарынан
адамның
денсаулығына және қоршаған ортаға келетін
теріс әсерлердің алдын алуға көмектеседі.
GB
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
Important safeguards. read carefully and keep for
future reference.
Incorrect operation and improper handling can
lead to malfunction of the appliance and injuries
to the user.
Before connecting the appliance for the first time
check that voltage indicated on the rating label
corresponds to the mains voltage in your home.
For home use only. Do not use for industrial
purposes. Do not use the appliance for any other
purposes than described in this instruction
manual.
Do not use outdoors or in damp area.
The appliance is not intended for use for
physically, sensory or mental disabled person
(including children) or for person with lack of life
experience or knowledge, if only they are under
supervision or have been instructed about the
use of the unit by responsible person.
Children must be under control in order not to be
allowed to play with the appliance.
Always unplug the appliance from the power
supply before cleaning and when not in use.
To prevent risk of electric shock and fire, do not
immerse the appliance in water or any other
liquids. If it has happened DO NOT TOUCH the
appliance, unplug it immediately and check in a
service center.
Do not use the device in bathrooms and near
water.
Do not place the appliance near heat sources.
Do not leave the appliance switched on when not
in use.
Do not use other attachments than those
supplied.
In case of power cord is damaged, its
replacement should be done by the manufacture
or service department or the other high-skill
person to avoid any danger.
Keep the cord away from sharp edges and hot
surfaces.
Do not pull, twist, or wrap the power cord around
the appliance.
Avoid contact with moving parts of the device. Do
not put pencils or other objects through the
protective grid of the fan.
Do not operate without fan installed protective
grid.
Do not attempt to repair, adjust or replace parts
in the appliance. Repair the malfunctioning
appliance in the nearest service center.
If the product has been exposed to temperatures
below 0ºC for some time it should be kept at
room temperature for at least 2 hours before
turning it on.
The manufacturer reserves the right to introduce
minor changes into the product design without
prior notice, unless such changes influence
significantly the product safety, performance, and
functions.
Manufacturing date is indicated on the unit and/or
on packing as well as in accompanying
documents in the following format XX.XXXX
where first two figures XX is the month of
production, and following four figures XXXX is
the year of production.
ASSEMBLING INSTRUCTIONS:
The device is intended for air circulation in the
room.
Fan is packed disassembled. Before assembling
make sure that all the required parts are
undamaged and included into the set.
Do not plug in the device before its assembling is
finished.
Tighten stand tube to stand base with screw. Fix
base cover to stand base with a screw (supplied
with a set).
Unscrew out-joint, put the stand cover and base
cover on the stand base, pull the extension pole
out then tighten the out-joint again.
Place control box firmly on top of extension pole,
tighten screw B.
Unscrew the blade cap by turning clockwise and
rear mesh nut by turning counter clockwise and
put both blade cap and rear mesh nut off the
motor shaft.
Put rear mesh on motor shaft.
Secure it with rear mesh nut.
Slide blades on motor shaft so that claws on
motor shaft match the blades slots.
Screw blade cap on shaft by turning counter
clockwise.
Put front mesh on rear mesh and close clips or
screw mesh ring to secure meshs together.
