Вентиляторы Scarlett SC-179 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
IM014
SC-179
6
РЕТТЕЛЕТІН ЕҢІС
•
Ауа ағынының бағытын желдеткіштің басқы бөлігін еңкейту немесе шалқайту арқылы өзгертуге болады.
ТАЗАЛАУ ЖӘНЕ КҮТІМ
•
Тазалаудың алдында құралды қоректену жүйесінен әрқашан ажыратып тастаңыз. Қайрақты құралдарды,
бензин, еріткіштер және басқа агрессивті химиялық заттарды қолданбаңыз.
•
Желдеткіш және қалақтарды сабын ерітіндіде дымданған матамен тазалаңыз.
САҚТАУ
•
Бұйымды құрғақ салқын орында сақтаңыз.
•
Желдеткішті маусымдық сақтау үшін оның картон орамын сақтау және қолдану ұсынылады.
GB
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
•
Please read these operating instructions carefully before connecting your kettle to the power supply, in order to
avoid damage due to incorrect use.
•
Before switching on the appliance for the first time please check if the technical specifications indicated on the
unit correspond to the mains parameters.
•
Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
•
For home use only. Do not use for industrial purposes.
•
Always unplug the appliance from the power supply when not in use.
•
Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall
socket immediately and have the unit checked by an expert before using it again.
•
Do not operate the appliance if the cord or the plug is damaged or if the appliance has been otherwise damaged.
In such cases take the appliance to a qualified specialist for check and repair if necessary.
•
Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.
•
To disconnect the appliance from the power supply pull it out by the plug only, not by the cord.
•
Place the appliance on a dry stable surface, away from sources of heat (e.g. hotplates); do not place it under
curtains and shelves.
•
Do not leave the appliance unattended when in use.
•
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliances by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
•
Avoid contact with moving parts of the appliance. Do not put pencils or other things through the front mesh / grille
of the working fan.
•
Do not switch on the fan without well-adjusted front and rear grilles.Do not attempt to repair, adjust or replace
parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
•
If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature
for at least 2 hours before turning it on
•
The manufacturer reserves the right to introduce minor changes into the product design without prior notice,
unless such changes influence significantly the product safety, performance, and functions.
ASSEMBLING INSTRUCTIONS:
•
Fan is packed disassembled. Before assembling make sure that all the required parts are undamaged and
included into the set.
•
Do not plug in the device before its assembling is finished.
•
With the help of a clip fix the fan onto the base or any other appropriate surface.
CAUTION:
•
Do not plug in the device before its assembling is finished.
•
Do not operate the appliance with damaged blades.
OPERATION
FAN OPERATING MODES
•
To switch the fan on put the mode switch to L or H position:
-1 -means low speed of fan
-2- means high speed of fan
•
To switch the fan off put the mode switch to OFF position
VERTICAL ADJUSTMENT
•
Air flow direction can be changed by adjusting fan control box in a higher or lower position by a vertical
adjustment screw.
MAINTENANCE
•
Before cleaning unplug fan first.
•
Clean the fan and blades with soft cloth moistened with soap solution.
•
Do not use abrasive cleansers, gasoline, solvents or other aggressive detergents.
STORAGE
•
Keep the device in dry cool place.
•
It is recommended to keep and to use for seasonal storage the original carton box of the appliance.
•
Do not use abrasive cleansers, gasoline, solvents or other aggressive detergents.
