Zigmund Shtain CNS 302.45 BX - Инструкция по эксплуатации - Страница 8

8 

  GENERAL  INFORMATION                                                                                                                                     

Carefully read this use and maintenance 

manual, where important information 

about installation, use and maintenance 

safety is provided. 

Keep this manual for future reference. 

Any installation operation (electric 

connections) shall be performed by 

specialized personnel, in compliance 

with all standards and regulations in 

force.

  SAFETY  WARNING                                                                                                                                         

The use of flat-bottomed pots, with 

a diameter equal to or slightly bigger 

than the heated area, is recommended. 

(Fig.5). Do not use pots that have a 

rough base, in order to prevent the hob 

thermal surface from being scratched. 

This appliance is not intended for use 

by children or infirm people without 

supervision.

  IMPORTANT                                                                                                                                            

- Avoid the overflow of liquids by 

reducing the heat supply when 

boiling or warming liquids.

- Do not leave any heating element 

switched on, if there are no pots, or 

if the pots are empty.

-  Once cooking is completed, turn the 

concerned heating element off, by 

using the control shown below.

-  This appliance is not intended for use 

by people (children included) with 

limited physical, sensorial or mental 

abilities, or lacking of experience 

and knowledge, unless they are 

supervised or well instructed about 

the use of the appliance, by a person 

who is responsible for their safety.

- Children should be supervised to 

assure that they do not play with the 

appliance.

- If the hob surface is cracked, turn 

the appliance off and disconnect 

it from the electric network , so as 

to avoid the possibility of electric 

shock.

  INSTALLATION  INSTRUCTIONS                                                                                                                    

These installation instructions are 

intended for a specialized installer 

and are meant as guidelines for the 

hob installation, adjustment and 

maintenance, in compliance with any 

regulations and standards in force. 

If a built-in oven or any other appliance 

generating heat is to be mounted 

directly under the vitro-ceramic hob, 

IT IS NECESSARY THAT SUCH 

AN APPLIANCE (the oven) AND 

THE VITRO-CERAMIC HOB ARE 

PROPERLY INSULATED

. 

Failure to comply with this precaution 

might result in the incorrect operation of 

the TOUCH CONTROL system.

•  Positioning:

This household appliance has been 

designed for built –in installation onto a 

worktop, as shown in the figure (Fig.2). 

Use sealing material along the whole 

perimeter - Fig.4 (Cut dimensions- 

Fig.2). This operation is necessary in 

order to prevent any liquid from entering 

inside the hob, being that the flatness 

of the top, the glass and their coupling 

cannot be assured. Fix the appliance 

on the worktop by using the 4 supports, 

taking the work top thickness into 

account (Fig.2). If, after installation, the 

lower part of the appliance is accessible 

from the lower part of the cabinet, it will 

be necessary to mount a spacing panel 

at the distances given (Fig.3). If the 

appliance is installed under an oven, 

this step will not be necessary. The 

appliance is not intended to be operated 

by an external timer or a separate remote 

control system.

 ENGLISH

EN