Zigmund Shtain CNS 147.30 BX - Инструкция по эксплуатации - Страница 25

the 

Heat up

 function will automatically deactivate, emitting 

a 

BEEP

.

The cooking zone will work at the set power level in a stable 

manner.

Heat residue function:

-  When a cooking zone is taken to position 

OFF

 and the glass 

surface temperature is higher than 65°, its display 

E

 will show 

a luminous signal 

1) If other zones are still working, the display will show a 
small  .

2) When the appliance is taken to position 

OFF

, the display 

will show the letter   in capitals.

O.S.D.(Overflow Safety Device) 

(Fig.4):

The cooktop has a safety system that turns all the plates 

OFF

and activates the 

safety lock 

if any liquid or objects are found 

on the control area.

The cooktop goes off automatically.

•  Maintenance (Fig.4):

Remove any residues of food and drops of grease from the 

cooking surface using the special scraper supplied on request. 

Clean the heated area as thoroughly as possible using SIDOL, 

STAHLFIX or similar products and a cloth/paper, then rinse 

with water and dry with a clean cloth.

Using the special scraper (optional) immediately remove 

any fragments of aluminium and plastic material that have 

unintentionally melted on the heated cooking area or residues 

of sugar or food with a high sugar content.

In this way, any damage to the cooktop surface is prevented.

Under no circumstances use abrasive sponges or irritating 

chemical detergents such as oven sprays or stain removers.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY 

FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE 

ABOVE WARNINGS.

- 25 -