Zigmund & Shtain CNS 024.60 BX - Инструкция по эксплуатации - Страница 3

1

Safety

•  The electrical equipment of the hob must have circuit 

breakers installed in accordance with national and local 
regulations.

•  The appliance must be installed and wired by an authorised 

installer in accordance with the manufacturer’s instructions 
and diagrams.

•  Electrical equipment specifications must be suitable for 

the maximum power indicated on the reference plate. The 
electrical socket must be grounded in accordance with 
applicable regulations. 

•  If the power cord is damaged, it must be replaced by the 

manufacturer, after-sales technical service or similar qualified 
technician to avoid hazard.

•  CAUTION! If the glass surface cracks or breaks the appliance 

must be immediately disconnected from the mains to avoid 
short circuit and electrical shock.

•  The appliance must not be used before the glass is replaced. 

The glass should be replaced by the after-sales service or by 
qualified personnel (4.1.1).

•  Do not place hot pots and pans on the sensors. This may 

damage the electronic circuits (4.1.3).

•  CAUTION! During operation, the casing and open parts of the 

appliance may become very hot. Avoid touching the heating 

Important

  Keep this manual with the appliance. If you sell or give 

the appliance to another person, make sure you also 
pass on the instruction manual. Read the provided 
instructions thoroughly before using and installing the 
appliance. They are designed to protect your own and 
others’ safety.

Instruction Manual

Very important: Read this instruction manual thoroughly. It will help you operate the hob properly and 
safely.

This manual is designed so that the texts relate to the corresponding figures. 

e n g l i s h