Zanussi ZGG 62411 XA - Инструкция по эксплуатации - Страница 7

Care and cleaning

Warning!

 Refer to the Safety chapters.

Warning!

 Deactivate the appliance and

let it cool down before you clean it.

Disconnect the appliance from the electrical
supply before you do cleaning or maintenance
work.

Warning!

 For safety reasons, do not clean

the appliance with steam cleaners or high-

pressure cleaners.

Warning!

 Do not use abrasive cleaners,

steel wool pads or acids. They can cause

damage to the appliance.

Scratches or dark stains on the surface
have no effect on how the appliance oper-

ates.

• You can remove the pan supports to easily

clean the hob.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy water
and dry them carefully before you put them
back.

• Wash stainless steel parts with water, and

then dry them with a soft cloth.

• The pan supports 

are not

 dishwasher proof.

They must be washed 

by hand

.

• When you wash the pan supports by hand,

take care when you dry them as the enamel-
ling process occasionally leaves rough
edges. If necessary, remove stubborn stains
using a paste cleaner.

• Make sure you position the pan supports

correctly after cleaning.

• To make the burners work correctly, make

sure that the arms of the pan supports are in
the centre of the burner.

•

Be very careful when you replace the
pan supports to prevent the hob top
from damage.

After cleaning, dry the appliance with a soft
cloth.

Removing the dirt:

1.

–

Remove immediately:

 melting plastic,

plastic foil, and food containing sugar.

–

Stop the appliance and let it cool
down

 before you clean: limescale rings,

water rings, fat stains, shiny metallic dis-
colorations. Use a special cleaner appli-
cable for surface of hob.

2.

Clean the appliance with a damp cloth and
some detergent.

3.

At the end 

rub the appliance dry with a

clean cloth.

The stainless steel can become tarnished if it is
too much heated. Refer to this you must not
cook with potstones, earthenware pans or cast
iron plates.

Cleaning of the spark plug

This feature is obtained through a ceramic igni-
tion candle with a metal electrode. Keep these
components well clean to prevent difficult light-
ing and check that the burner crown holes are
not obstructed.

Periodic maintenance

Periodically speak your local Service Force
Centre to check the conditions of the gas sup-
ply pipe and the pressure adjuster, if fitted.

7

www.zanussi.com