LuxDorf H60V40M451 - Инструкция по эксплуатации - Страница 9

9

Gas Connection and Safety 

1. 

For LPG (cylinder) connection, affix 

metal clamp on the hose coming from LPG 

cylinder. Affix an edge of the hose on hose 

inlet connector behind the appliance by 

pushing to end through heating the hose 

in boiled water. Afterward, bring the clamp 

towards end section of the hose and tighten 

it with screwdriver. The gasket and hose 

inlet connector required for connection is 

as the picture shown below.

NOTE:

  The  regulator  to  be  affixed  on  LPG  cylinder  should  have  300 

mmSS feature.

2. 

Natural gas connection should be 

done by authorized service. For natural 

gas connection, place gasket in the nut 

at the edge of natural gas connection 

hose. To install the hose on main gas 

pipe, turn the nut. Complete the con-

nection by making gas leakage control.

Gas hose and electric connection of the appliance should 

not pass next to hot areas such as back of the appliance. 

Gas hose should be connected by making wide angle turns 

against breaking possibility. Movement of appliance whose 

gas connection is made may cause gas leakage. 

Main Gas Pipe

Gasket
Hose Inlet Connector

Metal Clamp

Lpg Connection Hose

Main Gas Pipe

Gasket
Nut

Natural Gas Connection Hose

True

False

True

True

GB