Fulgor Milano SH 1124 G 2DWK XX - Инструкция по эксплуатации - Страница 13

12

13

GB

Maintenance Gas/Electrical

Prior to any operation, disconnect the appliance from 
the electrical system. For long-life to the equipment, a 
general cleaning operation must take place periodically, 
bearing in mind the following:
•  the glass, steel and/or enamelled parts must be 

cleaned with suitable non-abrasive or corrosive 
products (found on the market). Avoid chlorine-base 
products (bleach, etc.);

•  avoid leaving acid or alkaline substances on the 

working area (vinegar, salt, lemonjuice, etc.);

•  the wall baffle and the small covers (mobile parts of 

the burner) must be washed frequently with boiling 
water and detergent, taking care to remove every 
possible encrustation. Dry carefully and check that 
none of the burner holes is fully or partially clogged;

•  the electrical parts are cleaned with a damp cloth and 

are lightly greased with lubricating oil when still warm;

•  the stainless steel grids of the working area, after 

having been heated, take on a bluish tint which does 
not deteriorate the quality.  To bring colour back to its 
original state, use as lightly abrasive product.

N.B.- Cleaning of the taps must be carried out by 
qualified personnel, who must be consulted in case of 
any functioning anomaly. Check periodically the state 
of conservation of the flexible gas feed pipe. In case of 
leakage, call immediately the qualified technicians for its 
replacement.

DO NOT USE STEAM CLEANERS

510

909

490

840

53,5

55

510

620

480

560

770

55

490

510

750

Fig. 2

mod. LH 604 G WK

mod. LH 775 G WK

mod. SH 775 G DWK

510

909

55

490

840

770

55

490

510

750