Варочная панель Fulgor Milano FCLHD 8041 HID TS BK2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EN
BEFORE STARTING.
PRELIMINARY RECOM-
MENDATIONS OF THE
MANUFACTURER
Keep these instructions with the appliance.
Should the appliance be sold or passed onto
others, make sure that it is accompanied by the-
se instructions. We thank you for paying attention
to these recommendations before installing and
using the appliance, as they have been written for
your safety and that of others.
Upon delivery of the product, the packaging and
its general aspect must be checked. Any objec-
tions must be written on the delivery document,
of which you must keep a copy. The appliance
is destined to normal domestic use. It must not
endure any commercial or industrial use and it
cannot serve any other purpose different from the
one it has been designed for.
No warranty will be provided for any damages or
other consequences originating from an incorrect
installation or a misuse of the appliance.
With the aim of constantly improving our pro-
ducts, we reserve to ourselves the right of mo-
difying their technical, functional, aesthetic featu-
res. The appliance is already arranged to work
either in recirculating or ducting mode. Before
proceeding with the installation, all components
of the appliance be checked. In case of damaged
or missing components, make contact with the
retailer and do not proceed with the installation.
In ducting operation a maximum of 5 meters long
ducting is allowed. The number of elbows must
be limited, as each curve diminishes the duc-
ting efficiency of 1 linear meter (e.g. if you use
2 elbows by 90°, the length of the ducting must
not exceed 3 meters of length). Avoid any abrupt
change of direction in the ducting.
The ducting connected to the blower air outlet
must have a constant section of 220x90 mm.
The ducting must be made of a material appro-
ved by the regulations in force. Failure to respect
the above - mentioned instructions might result
in performance or noise problems, for which no
warranty will be provided.
22
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
