De Dietrich DTI 1358 DG - Инструкция по эксплуатации - Страница 11

EN

11

4 zones

For 

pans 

with 12 to 24 cm

bases

Press on the C arrows to select the required configuration. Confirm by
pressing OK (D)

or

WHEN POWERING ON

Press the on/off button (A) on the hob. 
Press OK (D). 
The screen lights up and gives you a choice of 4 different modes. 
Choose your configuration then confirm (D).
Press on the arrows (C) to select the required configuration. Confirm by
pressing OK (D)
Put your pan on the hob and press button B to detect the vessel’s loca-
tion. A red number appears in the chosen zone.
You can now adjust the power by pressing the arrows (C) and confir-
ming (D).
If you do not select a power level, the cooking zone will automatically shut
off after a few seconds.

STOPPING THE BURNER

Hold down the Stop button (G) of the zone used.

STOPPING THE HOB

Hold down the hob’s On/Off button (A): the screen switches to standby
mode. Pressing On/Off (A) stops all burners without the screen going
into standby mode.

COOKING TIMES (function 1)

Each cooking zone has its own timer. It can be used as soon as the coo-
king zone is turned on.
Press OK (D).
Press the arrows until you get to function 1. Confirm, then set the requi-
red time by pressing the arrows and confirm again with D (or the valida-
tion will occur automatically after a few seconds).

1 Horizone tech + 2 Zones

For the left part:

fish, grill or 

cookware with 12 to 24 cm

bases

2 Horizone tech

left or right:

fish

grills or cookware

with 12 to 24 cm bases

Grill zone

1 or 2 grills

vertically

SWITCHING ON FOR THE FIRST TIME

N.B.: You can always alter your settings when the display information is red. When the display
is white, your settings have been confirmed.
If you have 2 or more pans on your hob, the settings are always made when the display is red.
You can use the G buttons to select the burner to change settings (power, timer, etc.).

2  /  USING YOUR APPLIANCE

c l i g n o t a n t

c l i g n o t e m e n t