Варочная панель De Dietrich DTI 1089 V - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Quick Start Guide
EN
Controls Table
A
Complete continuum zone
B
Power level + and -
C
Left Continuum Zone
D
Right Continuum Zone
E
Power pre-sets
F
Boil Function
G
Elapsed Time
H
Boost Function
I
Start Control Function
J
Timer + and - controls
K
Lock Control
L
On / off control for selected zone
3
Quick Start Guide
Prior to using you appliance you need to ensure the appliance has been installed in accordance with the installation
instructions within this guide. Particular attention should be paid to the ventilation requirements as this could affect
the performance of the appliance as well as the long term reliability.
Operation
Care should be taken to ensure that the pan / pans being used cover a minimum of 80% of the cooking zone.
Place the pan on the zone you wish to use and select the zone on the control panel using the selector controls “A”
“C ” “D”or “L” .
Select either a pre-set power level “E”, the Boost function “H” or use the “+” or “-” controls to determine the desired
power level. If you wish to control more than one pan the zones should be selected in turn.
Noise
You may notice a clicking noise when either using multiple zones or a single zone on low power settings
(below level 7). This is normal and should not be considered a fault; it is the electronics of the appliance reg-
ulating the power delivery to the zones. You may notice a corresponding reduction of the bubbles in the base of the
pans on the hob, again this is normal.
Power sharing
The machine is manufactured with shared electronics controlling the cooking zones. The power delivered by
the independent electronics is split between the two zones. If “boost” is selected on one zone the power is
reduced on the other to ensure the maximum connected load is not breached. This is not a fault with the
appliance.
You may wish to select “Boost” on the Continuum setting, it is worth noting that you may notice a clicking and alter-
nating bubble pattern in the base of the cookware, this is normal.
Suitable cookware
If the display on the appliance flashes when set, this is an indication that either there is no pan on the zone
or, an unsuitable pan is being used. Please refer to the pan guide in the description section of this guide for
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
