De Dietrich DPI7686XS - Инструкция по эксплуатации - Страница 28

27

•

2

USE

- Set the time with touchpad 

. A “t”

flashes in the display (2.7.5).

- At the end of your adjustment “t” be-

comes becomes fixed and the count be-
gins.

Note:
You can stop a count in progress by
keeping your finger on the touchpad of
the selection on the display.

2.8 ELAPSED TIME key

This function displays the time since
the power setting was last changed for
a selected cooking zone.To use this

function, press the 

. The elapsed

time flashes in the selected zone's
timer display 

(2.8.1)

.

If you want cooking to end within a

specific time, press the 

key and

then, within 5 seconds, press 

+

on the

timer to increase the desired cooking
time. The elapsed time is displayed
fixed for 3 seconds and then the
remaining time is displayed. A beep
sounds to confirm your choice.
This function is available with or
without the timer function.
Note: if the timer is showing a time, it is
not possible to change it within 5

seconds of pressing 

. After 5

seconds, the cooking time can be
changed.

2.9 LOCKING THE CONTROLS
Child safety lock

Your hob has a child safety device
which locks the controls when the hob
is not in use or during cooking (to
maintain the current settings). For
safety reasons, only the stop key and
the zone selection keys are still active

i

i

i

g

and allow the hob or a cooking zone to
be switched off. 

Locking 

Press 

key (cadenas), until the "bloc"

locking symbol appears in one of the
displays and a beep confirms the
operation 

(2.9.1)

.

Table locked in operation

The display of cooking zones in
operation alternately indicates power
and the locking symbol .
When you press the power or timer keys
for the zones which are «on»:
«bloc» appears for 2 seconds and then
switches off.

Unlocking

Press key 

until the "bloc" locking

symbol disappears from the display and
a beep confirms the operation.

CLEAN LOCK function

This function locks the hob off while it is
being cleaned.
To activate Clean lock: 

Give a short press on key 

(padlock).

A beep sounds and the «bloc» symbol
flashes in the display.
After a predefined time, the lock will
automatically disengage. Two beeps
sound and «bloc» switches off. You can
stop the Clean Lock at any moment by

pressing and holding touchkey 

.

2.10 ICS FUNCTION
Intelligent Cooking System 

This function optimises the choice of
cooking zone for the diameter of
cookware used.
Proceed as follows:

b

b

b

b