De Dietrich DPI7572X - Инструкция по эксплуатации - Страница 30

•

2

USE

29

2.9 LOCKING THE CONTROLS
Child safety lock

Your hob has a child safety device
which locks the controls when the hob
is not in use or during cooking (to
maintain the current settings). For
safety reasons, only the stop key and
the zone selection keys are still active
and allow the hob or a cooking zone to
be switched off. 

Locking 

Press 

key (cadenas), until the "bloc"

locking symbol appears in one of the
displays and a beep confirms the
operation 

(2.9.1)

.

Table locked in operation

The display of cooking zones in
operation alternately indicates power
and the locking symbol .
When you press the power or timer keys
for the zones which are «on»:
«bloc» appears for 2 seconds and then
switches off.

Unlocking

Press key 

until the "bloc" locking

symbol disappears from the display and
a beep confirms the operation.

CLEAN LOCK function

This function locks the hob off while it is
being cleaned.
To activate Clean lock: 

Give a short press on key 

(padlock).

A beep sounds and the «bloc» symbol
flashes in the display.
After a predefined time, the lock will
automatically disengage. Two beeps
sound and «bloc» switches off. You can
stop the Clean Lock at any moment by

b

b

b

pressing and holding touchkey 

.

2.10 ICS FUNCTION
Intelligent Cooking System 

This function optimises the choice of
cooking zone for the diameter of
cookware used.
Proceed as follows:
Place the pan on the cooking zone, e.g.
28 cm dia.).
Select Boost power and possibly a
cooking time.

Appuyez sur la touche 

. Le symbole

«ICS» apparait dans l’afficheur 

(2.10.1)

- either the zone chosen is the best one
for the pan and «ICS» disappears
leaving the initial cooking parameters in
the display.
- or the zone chosen is not the best one
for the pan and the display then
indicates which zone should be used
and the settings are transferred to it
automatically (

2.10.2

).

N.B.

: The hob must be cold to use this

function.

2.11  RECALL  FUNCTION

This function lets you display the last
«power and timer» settings for all the
burners which were switched off less
than 3 minutes previously.
To use this function, the hob must be
unlocked. Press the On/Off key and then

give a short press on key 

(2.11)

. 

When the hob is operating, the function
lets you see the power and timer settings
for the burner(s) which have been
switched off for less than 30 seconds.

k

j

b