Варочная панель Barazza 1PIDC90N - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
24
• Chef Cook Function:
Chef Cook function is a features which enables
3 cooking zones with different heating powers.
Starting from the left to the right.
To activate this function, touch the Chef Cook
function key.
To disable it, touch the Chef Cook function key.
The power levels for all cooking zones are set to
0.
The following power levels are set and dissipated
as soon as a suitable cookware is placed onto the
cooking zones:
Number
zone
Power
level
2
2
1
6
4
9
• Warming level:
This function is used to keep boiled food warm.
The power level is between 0 and 1. To activate
the warming level you have to select the zone (L
zone), and press the D key. The display will show
.
• Power management:
The hob support power management to prevent
the mains connection from overloading. The pow-
er management is prioritazing: the cooking zone
which heating power has been increasing at last
will get the desired heating power, and the other
cooking zone will be reduced. The reduction of
power will be signaled to the operator by flashing
OFF of the cooking level (L zone) and the its pow-
er will be reduced.
• Power settings:
The power of the all hob can be set from its max-
imum [7.4 kW or 3.7 kW (for the hob with two
cooking zones)] to a minimum of 1.4 Kw, using a
step of 100w (0,1Kw), until a minimum of 1,4w by
the user menu.
The User menu is intended for end customer to
adapt the Touch Control to his personal needs.
To enter in the User Menu, the command is in
standby mode, touch ON/OFF Command to
power up the Touch Control. Touch the ON/OFF
command again within 3 sec. to set the Touch
Control to standby mode again. Special function
Command starts pulsating (for 60 sec. max). The
menu is automatically exited after that. Press and
hold down pulsating the Command. Then press
all cooking zone selection Command in clockwise
direction, starting with the left front cooking zone
selection Command. Skip cooking zone selectrion
Command which are not available.
In the following table there are described the im-
plemented user menu items:
EN
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
