Barazza 1PIDC80N - Инструкция по эксплуатации - Страница 22

22

•  Pan  detection:

This cooktop is fitted with an interactive control 

system that makes it very easy and comfortable 

to use. After switching on the cooktop, when you 

put a cookware on the glass, the control system 

automatically detects it, and  the display of rela-

tive cookzone shows 0. You then just have to set 

the expected cooking level. 

If you remove the pan on that cookzone, the dis-

play shows  .

• Switching the cooking area 

  ON/OFF: 

Put a cookware on the desired cooking zone and 

press your finger on L keys zone. Then the com-

mand shows the H zone. Press H key zone to go 

to position 9 (max. power) or to go to position 1 

(min. power). The power of the single cooking 

zone can be adjusted in 9 different positions and 

will be shown on the relative luminous display with 

a number from “1 to 9”. 

To swicth OFF that cooking zone you have to 

press 0 in the H key zone, and automatically the 

display of the zone shows 0 (in the L key zone).

• Booster function: 

The booster enables the induction to dissipate a 

higher power for a cooking zone for a short period 

of time (5 min). 

As the booster function may reach high tempera-

tures, it must only be used for cooking processes 

using water. Oil or fat may start to burn if booster 

is used.

Choose the desire cooking zone L, then type the 

P symbol on the H zone. The booster for the se-

lected cooking zone is activated, and now the rel-

ative display shows P.

To remove the function, select a cooking level for 

the cooking zone the booster function is current-

ly active. The booster function is terminated and 

the cooking zone is heated with the new selected 

cooking level.

• Residual heat indication: 

If the temperature of the cooking zone is still high 

(over 60°) after it has been switched off, the rel-

ative display will indicate the H symbol (residual 

heat). The symbol will only switch off when the 

burn risk is no longer present.

• Timer function: 

There are 2 different types of timers. If ,more than 

one timer is set, the timer will always display the 

lowest remaining time. Both the timers can be ad-

justed within a range of 1 min to 9 h 59 min.

• Stand alone Timer / 

  Cooking zone Timer: 

The 

Stand alone timer

 has the behavior of an 

egg timer. To active this function, ensure that no 

cooking zone has been selected, the timer show 

“--”, touch the timer, which display 00 flashing for 

the next 10 sec. Adjust the desired start time digit 

for digit +/- , do not perform any action for about 

5 sec. The timer starts counting backwards. Be-

neath 10 min, the display shows  the current time 

accurate to the second. If it has reached 0, a sig-

nal tone will be emitted. To change the value of 

the Stand-alone timer, the user has to ensure that 

no cooking zone has been selected, then touch 

the timer key, set the new desired time, and fi-

nally after 5 sec, the timer starts counting back-

wards starting with the new time. To disable this 

function, first of all ensure that no cooking zone 

has been selected, then touch the timer key, the 

current time value is displayed flashing, set the 

Stand-alone time to”000”, at this point the funcion 

is deactivated.

The 

Cooking zone Timers

 can be used to switch 

a cooking zone OFF automatically after the set 

time has run out. To activate this function, the user 

can select the corresponding cooking zone, touch 

the telative Timer key G, then adjust the desired 

start time (+/-), if do not perform any action for 

about 5 sec, the timer starts counting backwards. 

To change the value of the cooking zone timers, 

select the corresponding cooking zone, touch the 

time, and set the new desired time (+/-), do not 

perform any action for 5 sec., the the timer starts 

counting backwards starting with the new time. To 

disable this timer, the user have to set the cooking 

zone time to “000”.  

• Pause function:  

Pause function is a feature to “freeze” the cooktop 

for max. 10 min. For example, if the user is leav-

ing the cooktopfor a short period of time. During 

the pause function is active, no cooking zone is 

dissipating any power, and all timers (including 

EN