Варочная панель Smeg PDXF116RS - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
34
Instructions for the Installer
9. GAS CONNECTION
Before installing, check that the local gas main (type and pressure) and
the appliance's settings are compatible.
There are 2 ways to connect the appliance to the domestic gas main:
1- Make two branches with a pipe or steel hose and unite them with a T-
fitting just downline of the gas main fitting, or
2- Unite the two gas fittings on the appliance itself with a
pipe
and
intercept the gas main fitting at the T-fitting.
In both cases, all pipes connected to the gas main must be equipped
with a safety shut off valve.
The connection to the gas mains may be made using a
copper pipe
or a
continuous-wall
steel hose
in accordance with the relevant regulations.
When installation is complete, check for any leaks with a soapy solution,
never with a naked light. The appliance has been tested for
G20
(2H)
natural gas
at the pressure of 20 mbar.
For use with other types of gas, see point. "10. ADAPTING TO
DIFFERENT TYPES OF GAS".
The gas intake connection has an external ½" gas thread (ISO 228-1).
Connection with copper pipe:
The
connection to the gas supply mains
must be made so that no stresses or
strains of any kind are applied to the
appliance. The connection can be
made using the adapter unit
C
with
two conical elements, always fitting
the gasket
A
supplied.
Connection with steel hose:
Use
only continuous wall steel hoses
which comply with the relevant
regulations, and always fit the
provided gasket
A
between the hob
fitting and the hose itself
B
.
When connecting with a hose, ensure that the total length of the pipeline is
not more than 1.5 metres; also ensure that the hoses do not touch moving
parts and are not crushed.
9.1
Bottled gas connection
Use a pressure regulator and make the connection to the gas cylinder in
accordance with the relevant regulations. Make sure that the gas supply
pressure is as stated in the table in point "10.2 Burner and Nozzle Data
Tables".
In this case as well, use a
copper pipe
or a continuous wall
steel hose
.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
