Kuppersberg ICD 901 - Инструкция по эксплуатации - Страница 38

38

TECHNICAL PASSPORT

ENGLISH

Hob

Using Bridge-Heating function

Enter the mode

Press the bridge-heating button 

 enter the bridge-heating mode, the 

display mode as below:

Exit mode:

Press and hold the bridge-heating 

button for three seconds to exit the 

bridge mode  , and all the heating 

zones will be reset to zero at the same 

time.

Heating Level adjustment:

In the bridge-heating mode, press 

the heating zone selection button that 

needs to be adjusted. At this time, the 

two heating zones in the bridge mode 

flash  and  display  at  the  same  time, 

and then adjust the power level. After 

the  operation,  it  will  be  flashing  for  10 

seconds  to  confirm  this  operation.  In 

the process of level operation, the two 

burners’ digital tubes display the content 

independently, which is divided into the 

following states:

Level adjustment

Display Content

Bridge-Heating 

Function

Heating 

Le

ve

l

1

2

3

4

5

6

7

8

9

Heating 

zones’

display

Using the Double ring zone

Â

You can set the double ring zone 

after the zone is working.

Â

You can set the zone working by 

double ring or single ring.

1. Turn on, the double ring work by 

default.

2. Select the relevant cooking zone 

which is working by touching the zone 

select key

3. Press the double ring control key  

adjust the double ring or single ring.

Using the pause function: Stop & 

Go

The pause function can be used at 

any time during cooking. Allows Stop 

the hob and restore cooking without 

losing any adjustments.

1.  Make Sure the cooking zone is 

running.

2. 

Press the Stop & Go button. The 

Cooking zone indicators will show  

. 

The hob Will Be deactivated, except for 

the Stop & Go , ON/OFF and Child Lock.

3.  To Cancel the pause, press the 

Stop & Go button again. The Cooking 

Zones will return to the power level you 

previously set.