Kuppersberg FQ7TG W - Инструкция по эксплуатации - Страница 20

20

Technical passporT

english

gas hob

8.  M A I N T E N A N C E  A N D 

C L E A N I N G 

Please comply with the following 

rules before cleaning and maintenance. 

Â

Close the unit for safety purposes. 

If your device is set to natural gas setting 

close the valve. For LPG hobs close hood. 

Â

Take out the plug of your unit 

from wall socket. 

Â

If the hob is hot wait until it will 

be cooled. 

Â

In order that you use the glass 

hob and grills for longer periods you 

need to clean them with appropriate 

cleaning agents at certain intervals. 

Â

Cleaning on stainless surfaces 

should be conducted in accordance 

with the steel surfaces, and the surface 

should be dried preferably with a soft 

leather part. 

Â

In order to avoid any damage to 

the burning system do not use burning 

system when the burners are not 

installed. 

Â

After the thermo-coupled 

cleaning providing plug and safety 

system, clean it to place burners in 

suitable manner. 

Â

Wash the upper burning heads at 

certain intervals with water and clean 

and dry the gas channels with brush. Pay 

attention to install the burning heads on 

their places. 

Â

When you clean the burner do 

not use acid, thinner, benzene or similar 

chemical. 

Â

You need to clean your glass 

hob and its grills with suitable cleaning 

agents in order to use it for longer 

period. 

Â

It should be cleaned with suitable 

cleaners for stains and oil. 

Â

Harsh cleaning agents, stain 

removers and detergents, wire wool and 

sponge should not be used. 

Â

No cold liquid should be poured 

on the glass surface or the burners when 

they are hot. The glass may crack due to 

thermal shock. 

Clean the hob regularly after waiting 

for cooling after each use in order to 

keep your hob at the best manner. 

Do not take out the control switches 

in any manner during cleaning. 

Enamel Parts 

All enamel parts are used by using 

water with soap and suitable detergents. 

The hob should be dried thoroughly 

after the process.

Pan Supports 

Grills may be washed in the 

dishwasher. 

Burner 

The burners consisting of two parts 

may be leaned by using detergent. 

The burners should be dried after 

cleaning process and placed their places 

delicately. 

In the electronic ignition models, the 

electrode should be left cleaned all the 

time. 

In the safety valve models, the valve 

should be cleaned for failsafe operation. 

After completion of the process, 

the burners should be placed in their 

placement to their places. 

The burning system should not 

be used when burners are not in their 

places to avoid damage to electronic 

ignition system.