Korting HK 42031 BW - Инструкция по эксплуатации - Страница 20

O = 

Heating plate with active timer function indicator.

Cooktop Ignition:

- Verify that "B1" led is off before turning the equipment on; 

otherwise, turn it off by pressing the "B" key button for ap-

proximately 2 seconds.

- Next, select the "A" button.

- All "G" displays will show a ‘0’ for about 10 seconds. If no 

action is taken during this period, the cooktop will go off.

Heating Plate Ignition:

- A heating plate can be turned on by selecting one of the "E" 

buttons. A blinking zero will appear on the display.

- Use "+" or "-" buttons to regulate the power level. If the "+" 

button is selected, the display will show power level 1. If the 

"-" button is selected, the display will show power level 9.

- After this, power level can be regulated by pressing the "+" 

or "-" buttons.

Turning off the heating Plate:

- Select the appropriate heating plate by pressing the "E" but-

ton. The display will start blinking.

- Use the "-" button to set power level to zero.

OR

- Select the heating plate by pressing the "E" button and the 

display will start blinking.

- Press the "+" and "-" buttons simultaneously.

You can turn off all the heating zones simultaneously by 

pressing the ON/OFF button.

Double Plate Function:

- The double plate function is only activated, depending on 

the model, on the "E1-E3" heating plates.

- Select and adjust the power level as described in "Heating 

Plates Ignition" section.

- Select the "F" button.

- After activating the double plate, a "F1-F3" fixed led will ap-

pear near the display of the previously selected plate.

To deactivate this function, follow the instructions below:

- Select the plate using the "E1-E3" button.

- Press the "F" button to deactivate this function. The "F1-F3" 

led will go off at the same time. 

Triple Plate Function:

- The triple plate function is only activated, depending on the 

model, in the "E3" heating plates.

- Select and adjust the power level as described in the "Heating 

Plates Ignition" section.

- Select the "F" button.

- After activating the triple plate, an "F3" blinking led will ap-

pear near its corresponding display.

- Select the "F" button again to activate the triple plate.

- At this point the "F3" led will be fixed.

To deactivate this function, follow the instructions below:

- Select the plate using the "E3" button.

- Press the "F" button to deactivate this function, and the led 

near the display starts blinking.

- Next the double heating zone will operate again.

Residual Heat Function:

- When the "E" heating plate is in position ‘OFF’, and the glass 

surface temperature is above 50 ºC, a light indicator appears 

on the "G" display of the heating plate:

1)  If other plates are still operating, the display shows an 

alternating "0" and "H";

2)  When the equipment is in the ‘OFF’ position, the display 

shows a fixed "H".

Key Function 

(Fig.4B)

:

To prevent children or people- requiring supervision- from 

using the cooktop, all functions can be blocked with the 

"B" button.

To activate or deactivate, press the "B" button for approxi-

mately 2 seconds. The function is activated when the "B1" 

indicator is turned on.

If the appliance is on and the key function is activated, the 

ON/OFF button works in the same way.

O.S.D.(Overflow Safety Device) 

(Fig.4):

The cooktop has a safety system that turns all the plates 

OFF

and activates the 

safety lock 

if any liquid or objects are found 

on the control area.

The cooktop goes off automatically.

HEAT UP:

The 

Heat Up

 function allows the heating plate to be at 

maximum temperature for a certain period of time; then, the 

temperature drops to a lower selected value.

HEAT UP activation:

- Select the heating zone using the "E" button.

- Set power level to 9.

- Select the "+" button again.

- A "•" decimal point will appear on the display, near the power 

level, for about 5 seconds. During this period select the desired 

power level -between 1 and 8- to be reached within a short 

period of time.

- If you select power level 9 the function will be cancelled.

- When the heat up function is activated, it is possible to raise 

the temperature level selected before.

- When the function is over, an acoustic BEEP signal is heard. 

After the acoustic signal, the appliance will continue working 

with the power level set beforehand.

HEAT UP deactivation:

- Select the heating zone using the "E" button.

- Set power level to 9.

- When  the  "•"  decimal  point  on  the  display  disappears,  the 

function is deactivated.

TIMER

 (Fig.4T)

:

This function sets the auto turn-off time (from 1 to 99 minutes) 

for the selected heating plates.

Note:

 The 

Timer

 can be simultaneously activated in all the 

heating plates.

- Select the "E" heating plate.

- Set the power level, from 1 to 9, by pressing the "+" and "-" 

buttons.

- Select the "F" timer button.

- The "O" plates indication led will start blinking.

- Set the desired time using the "+" and "-" buttons.

- After some seconds, the time set will be fixed on the "N" 

display and the remaining time will be shown.

- When the time set before is over, the "N" timer display and 

the "O" plates indicator will start blinking followed by an 

acoustic signal. This indicates that the time set is over and 

that the heating zone is off.

- If the timer is activated simultaneously in more plates, the 

minimum residual time will appear on the display with the 

corresponding heating zone blinking led.

- To deactivate the acoustic signal, press the "T" timer button; 

otherwise, it will be automatically off after about 1 minute.

- To deactivate the blinking light indicator, press the "T" timer 

button.

To deactivate the timer function before the set time, follow 

the instructions below:

- Select the "E" heating zone.

- 20 -