Варочная панель Elica NIKOLATESLA SWITCH BL/A/83 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
65
USING THE EXTRACTOR FAN
Power-on
Press (touch)
ON/OFF hob/ extractor
The indicator light will turn on to indicate that the hob/extractor
is ready for use
Press again to turn off
Note: This function has priority over the others.
Switching on the extractor fan:
Touch (press) the selector
to activate the extractor fan
Extraction speed (power):
touch (press) the selector
to increase the extraction
speed (power) (0-10);
touch (press) the selector
to decrease the extraction
speed (power) (10-0);
Timer
The Timer is activated at any speed by pressing the symbol
display
(10)
will show the countdown
display
(8)
will show the symbol
Extractor fan Timer regulation
The preset shut-down times can be modified. The variation
must be made when the Timer is active.
•
Press
to increase the automatic shut-down time
•
Press
to decrease the automatic shut-down
time
Filter saturation indicator
The hood indicates when filter maintenance is needed:
Grease filter
the
“
”
(
11
) LED lights up
Activated carbon odour filter
the
“
”
(
11
) LED flashes
Reset filter saturation
After carrying out maintenance on the filters (grease and/or
activated carbon) hold down the
key;
the
“
”
LED turns off and the count restarts.
Activation of activated carbon odour filter saturation
indicator
This indicator is normally deactivated.
To activate it, proceed as follows:
- turn on the aspiration hob by pressing
;
- with the aspiration motor and cooking zones off, press and
hold
;
-
“
”
turns on, then off to indicate successful
activation.
Deactivation of activated carbon odour filter saturation
indicator
repeat the activation steps described above
“
”
flashes, then turns off to indicate successful
deactivation.
Automatic mode
The hood will turn on at the most suitable speed, adapting the
extraction capacity to the maximum cooking level used in the
cooking zone.
Once the hob is turned off, the hood adapts its aspiration
speed, gradually decreasing it, so as to eliminate residual
vapours and odours
To activate this function:
Briefly press
, the LED "
"
(11)
will light up to indicate
that the hood is working in this mode.
Automatic hood mode with SNAP
®
For information on how to make the connection between the
hood and SNAP
®,
see the manual supplied with
SNAP
®
or
visit www.elica.com.
Note:
SNAP
®
is an auxiliary extraction unit able to operate at
the same time as the hood.
To activate this function:
Briefly press
, the LED "
" and the LED
SNAP (11)
will light up to indicate that the hood is working in this mode.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
