Electrolux CIL61443C - Инструкция по эксплуатации - Страница 5

• Seal the cut surfaces with a sealant to

prevent moisture from causing swelling.

• Protect the bottom of the appliance from

steam and moisture.

• Do not install the appliance next to a door

or under a window. This prevents hot

cookware from falling from the appliance

when the door or the window is opened.

• Each appliance has cooling fans on the

bottom.

• If the appliance is installed above a

drawer:

– Do not store any small pieces or

sheets of paper that could be pulled

in, as they can damage the cooling

fans or impair the cooling system.

– Keep a distance of minimum 2 cm

between the bottom of the appliance

and parts stored in the drawer.

• Remove any separator panels installed in

the cabinet below the appliance.

2.2 Electrical Connection

WARNING!

Risk of fire and electric shock.

• All electrical connections should be made

by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make

sure that the appliance is disconnected

from the power supply.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

mains cable or plug (if applicable) can

make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near sockets.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug (if applicable) or to the mains

cable. Contact our Authorised Service

Centre or an electrician to change a

damaged mains cable.

• The shock protection of live and insulated

parts must be fastened in such a way that

it cannot be removed without tools.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have an

isolation device which lets you disconnect

the appliance from the mains at all poles.

The isolation device must have a contact

opening width of minimum 3 mm.

2.3 Use

WARNING!

Risk of injury, burns and electric

shock.

• Remove all the packaging, labelling and

protective film (if applicable) before first

use.

• This appliance is for household (indoors)

use only.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings

are not blocked.

• Do not let the appliance stay unattended

during operation.

• Set the cooking zone to “off” after each

use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on the

cooking zones. They can become hot.

• Do not operate the appliance with wet

hands or when it has contact with water.

• Do not use the appliance as a work

surface or as a storage surface.

• If the surface of the appliance is cracked,

disconnect immediately the appliance

ENGLISH

5