VITEK VT-2340 - Инструкция по эксплуатации - Страница 6

Увлажнители VITEK VT-2340 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 32
Загружаем инструкцию
background image

6

 ENGLISH

USING THE REMOTE CONTROL (20)

AT TENTION!
Batteries  leakage  can  cause  injuries  or  the 
unit  damage.  To  avoid  the  unit  damage, 
follow the instructions given below:

– 

use only the “AAA” batteries;

– 

do not use old and new batteries at the same 
time or different types of batteries;

– 

do not recharge the batteries;

– 

insert  the  batteries  strictly  following  the 
polarity;

– 

remove the batteries if you are not planning to 
use the unit for a long time;

– 

replace the batteries in time.

– 

apply to specialized centers for further recy-
cling of the batteries;

– 

avoid the power nippers circuit.

– 

To  use  the  remote  control  (RC)  (20)  open 
the  battery  compartment  lid  (21)  and  insert 
2  “AAA”  batteries  (not  supplied  with  the  unit) 
into  the  battery  compartment  strictly  follow-
ing  the  polarity,  close  the  battery  compart-
ment lid (21). 

– 

If  you  do  not  use  the  unit  for  a  long  time, 
remove  the  batteries  from  the  battery  com-
partment of the remote control (20).

Note:  –  the  buttons  on  the  remote  control  (20) 
fully  correspond  with  the  buttons  on  the  control 
panel (6).

AROMATIZATION FUNCTION

– 

If  you  want  to  use  the  aromatization  function, 
add  a  few  drops  of  aromatic  oil  into  the  con-
tainer (8) 

Notes:

– 

use water-soluble aromatic oils only.

– 

if  you  are  not  going  to  use  the  aromatization 
function, wash the aromatic oil container (8).

CLEANING AND CARE

WARNING!  Always  switch  the  air  humidifier  off 
and unplug it before cleaning.

Hard  water  causes  appearance  of  mineral  scale 
in the process chamber (7) and in the water tank 
(3)  that  leads  to  improper  operation  of  the  unit. 
To avoid it:

– 

use  filtered,  boiled  and  settled  water.  If  tap 
water  is  hard,  it  is  recommended  to  mix  tap 
water  with  distilled  water  in  proportion  1:1. 
If  tap  water  is  too  hard,  mix  it  with  distilled 
water in proportion 1:2 or use distilled water 
only.

– 

Using  of  water  with  high  content  of  minerals 
may  lead  to  white  deposits  on  surfaces  near 

the  air  humidifier  and  it  is  not  a  sign  of  mal-
function of the air humidifier.

– 

Change water in the water tank (3) twice a week.

– 

Thoroughly  wash  the  process  chamber  (7) 
and  the  water  tank  (3)  with  neutral  detergent 
solution twice a week.

– 

To  clean  the  “sprayer”,  add  5-10  drops  of 
detergent  on  it  and  wait  for  approximately 
10-15  minutes.  Remove  the  scale  from  the 
sprayer  surface  and  then  wash  the  process 
chamber (7) with neutral detergent solution.

– 

Rinse the process chamber (7) and the water 
tank  (3)  several  times.  Wipe  the  process 
chamber (7) with a soft cloth. 

– 

Clean  the  air  humidifier  body  (9)  with  a  soft, 
slightly damp cloth, and then wipe it dry.

Notes:

– 

do  not  immerse  the  air  humidifier  body  (9) 
into water or other liquids;

– 

do not use abrasive substances and solvents to 
clean «sprayer» and the air humidifier body (9).

– 

as a cleaning agent for the “sprayer” you can 
use a descaling agent for kettles, strictly fol-
lowing the instruction for this substance.

Mineral filter (4)

The  mineral  filter  purifies  water  of  admixtures, 
heavy  metal  ions,  bacteria,  removes  a  foreign 
smell,  prevents  appearance  of  white  deposits 
near the operating air humidifier.

Cleaning the mineral filter

– 

It  is  recommended  to  wash  the  mineral  fil-
ter  (4)  once  a  month,  and  when  using  “hard 
water”, 2-3 times a month.

– 

Remove the water tank (3), unscrew the lid (5) 
and  remove  it,  remove  the  mineral  filter  (4), 
turning it counterclockwise.

– 

Wash the filter (4) under running water jet.

– 

Install the mineral filter (4) on the lid (5) rotat-
ing it clockwise.

STORAGE

– 

Pour  the  water  out  of  the  tank  and  make 
sure  that  the  process  chamber  (7)  and  the 
“sprayer” are dry before taking the unit away for  
storage.

– 

Do  not  keep  the  air  humidifier  with  water 
inside the tank (3) or the process chamber (7).

– 

Before  taking  the  mineral  filter  (4)  away  for 
storage, clean it and dry; keep the filter (4) in 
a darkened cool place.

– 

Keep  the  air  humidifier  in  a  dry  cool  place 
away from children and disabled persons.

IM VT-2340.indd   6

18.01.2019   10:20:56

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-2340?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"