VITEK VT-2339 - Инструкция по эксплуатации - Страница 4

Увлажнители VITEK VT-2339 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 24
Загружаем инструкцию
background image

4

ENGLISH

PRODUCTION  AREAS  AND  WORK  SPACES  IS 

PROHIBITED.

BEFORE THE FIRST USE

After  unit  transportation  or  storage  at  low 

temperature  keep  it  for  at  least  three  hours 

at room temperature before switching on.

There  may  be  water  spots  in  the  air  humidifier, 
this is normal, as the unit has undergone factory 
quality control.

– 

Unpack  the  unit,  remove  any  stickers  and 
package materials that can prevent unit oper-
ation. Check the unit for damages. In case of 
damages do not switch the unit on.

– 

Before  plugging  the  unit  in  make  sure  that 
your home mains voltage corresponds to the 
unit operating voltage.

Notes:

– 

Use  the  air  humidifier  at  the  room  tempera-

ture from +10° С to +40°С, and relative humid-

ity less than 80%.

– 

Water temperature should not exceed +40°С.

AIR HUMIDIFIER OPERATION 

 •

Remove the lid with mist release openings (1) 
from the tank (2).

 •

Remove the tank (2) from the unit body (8).

 •

Turn  the  tank  (2)  over,  take  the  lid  (4)  off  by 
turning it counterclockwise.

 •

Fill  the  tank  (2)  with  the  required  amount  of 
water,  insert  the  lid  (4)  in  the  water  inlet  (3) 
and turn it clockwise.

 •

Place  the  filled  water  tank  (2)  on  the  unit 
body (8).

 •

Insert the power plug into the mains socket.

 •

Switch the air humidifier on, turning the knob (7) 
clockwise, the ON indicator (6) will light up.

 •

Set  the  mist  release  intensity  by  turning  the 
knob (7).

 •

If the water tank (2) is empty, the indicator (6) 
will light up red.

 •

Switch the air humidifier off, turning the knob 
(7)  counterclockwise  as  far  as  it  will  go,  the 
indicator  (6)  will  go  out.  Unplug  the  unit.  Fill 
the tank (2) with water, install it to its place and 
switch the unit on.

 •

After  finishing  the  operation,  switch  the  air 
humidifier  off,  turning  the  knob  (7)  counter-
clockwise until bumping, the indicator (6) will 
go out; after that remove the power plug from 
the socket.

Note:

– 

the continuous operation time of this humidi-

fier is 8 hours.

– 

if  the  humidifier  is  switched  off  and  there  is 

still some water in the tank, turn the knob (7) 

to  the  left  until  bumping  and  switch  the 

humidifier  on  again,  turning  the  knob  (7) 

clockwise  and  setting  the  necessary  mist 

release intensity.

CLEANING AND CARE

WARNING!  Always  switch  the  air  humidifier 

off  and  unplug  it  before  maintenance  works  or 

cleaning.

 •

Hard water causes the appearance of mineral 
scale on the sprayer (5), on the inner parts of 
the  body  and  in  the  water  tank;  that  leads  to 
improper  operation  of  the  air  humidifier  and 
the  appearance  of  white  deposits  on  objects 
of the interior.

 •

To  avoid  this,  it  is  necessary  to  clean  the 
sprayer (5) weekly and to change water in the 
tank (2) as often as possible.

 •

If  you  are  not  going  to  use  the  humidifier  for 
a  long  time,  pour  out  water  from  the  tank  (2) 
and the operating chamber of the sprayer (5), 
wash  the  water  tank  (2),  wash  and  clean  the 
operating chamber of the sprayer (5) and the 
sprayer  (5)  itself,  dry  the  unit  thoroughly  and 
take it away for storage.

Weekly care

 •

Once a week wash the water tank (2) and the 
process  chamber  of  the  «sprayer»  (5)  thor-
oughly with neutral detergent solution.

 •

Then rinse them with water carefully.

 •

Add  5-10  drops  of  the  detergent  on  the 
sprayer  (5),  wait  for  about  2-5  minutes. 
Remove  the  deposits  from  the  sprayer  (5) 
surface with a brush.

Note: As a cleaning agent for the sprayer (5) you 

can use scale removers for kettles.

 •

Clean  the  air  humidifier  body  (8)  with  a  soft 
slightly damp cloth, and then wipe it dry.

 •

Do  not  immerse  the  air  humidifier  body  (8), 
the power cord and the power plug into water 
or  other  liquids.  Provide  that  no  liquid  gets 
inside the air humidifier body (8).

 •

Do not use solvents or abrasives to clean the 
surface of the body (8) and the water tank (2).

STORAGE

 •

If you are not going to use the unit for a long 
time  and  want  to  take  it  away  for  storage, 
make  sure  that  all  its  parts  are  dry,  includ-
ing the process chamber of the sprayer (5).

 •

Do  not  store  the  unit  with  water  in  the 
tank  and  in  the  process  chamber  of  the 
sprayer (5).

 •

Keep  the  air  humidifier  away  from  children  in 
a dry cool place.

IM VT-2339.indd   4

07.11.2018   14:32:49

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-2339?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"