VITEK VT-2334 W - Инструкция по эксплуатации - Страница 4

Увлажнители VITEK VT-2334 W - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 20
Загружаем инструкцию
background image

4

 ENGLISH

 •

Transport the unit in the original package only.

 •

For environment protection do not discard the 
unit with usual household waste after its ser-
vice life expiration; apply to a specialized cen-
ter for further recycling.

 •

Keep the unit out of reach of children and dis-
abled persons.

THE  UNIT  IS  INTENDED  FOR  HOUSEHOLD 
USAGE ONLY

BEFORE THE FIRST USE

After  unit  transportation  or  storage  under  cold 
(winter)  conditions,  it  is  necessary  to  keep  it  for 
at least three hours at room temperature.
There  may  be  water  spots  in  the  air  humidifier, 
this is normal, as the unit has undergone factory 
quality control.

– 

Unpack  the  unit,  remove  any  stickers  and 
package materials that can prevent unit oper-
ation. Check the unit for damages. In case of 
damages do not switch the unit on.

– 

Before  plugging  the  unit  in  make  sure  that 
your home mains voltage corresponds to the 
unit operating voltage.

Notes:

– 

Use  the  air  humidifier  at  the  room  tempera-
ture from +10° С to +40°С, and relative humid-
ity less than 80%.

– 

Water temperature should not exceed +40°С.

AIR HUMIDIFIER OPERATION 

 •

Remove the lid with mist release openings (1) 
from the tank (2).

 •

Remove the tank (2) from the unit body (8).

 •

Turn  the  tank  (2)  over,  take  the  lid  (4)  off  by 
turning it counterclockwise.

 •

Fill  the  tank  (2)  with  the  required  amount  of 
water,  insert  the  lid  (4)  in  the  water  inlet  (3) 
and turn it clockwise.

 •

Place  the  filled  water  tank  (2)  on  the  unit 
body (8).

 •

Insert the power plug into the mains socket.

 •

Switch  the  air  humidifier  on,  turning  the 
knob  (7)  clockwise,  the  ON  indicator  (6)  will 
light up.

 •

Set  the  mist  release  intensity  by  turning  the 
knob (7).

 •

If the water tank (2) is empty, the indicator (6) 
will light up red.

 •

Switch the air humidifier off, turning the knob 
(7)  counterclockwise  as  far  as  it  will  go,  the 
indicator  (6)  will  go  out.  Unplug  the  unit.  Fill 

the tank (2) with water, install it to its place and 
switch the unit on.

 •

After  finishing  the  operation,  switch  the  air 
humidifier  off,  turning  the  knob  (7)  counter-
clockwise until bumping, the indicator (6) will 
go out; after that remove the power plug from 
the socket.

Note:

– 

the continuous operation time of this humidi-
fier is 8 hours.

– 

if  the  humidifier  is  switched  off  and  there  is 
still some water in the tank, turn the knob (7) 
to the left until bumping and switch the humid-
ifier on again, turning the knob (7) clockwise 
and setting the necessary mist release inten-
sity.

CLEANING AND CARE

WARNING! 

Always  switch  the  air  humidifier 

off  and  unplug  it  before  maintenance  works  or 
cleaning.

 •

Hard water causes the appearance of mineral 
scale on the sprayer (5), on the inner parts of 
the  body  and  in  the  water  tank;  that  leads  to 
improper  operation  of  the  air  humidifier  and 
the  appearance  of  white  deposits  on  objects 
of the interior.

 •

To  avoid  this,  it  is  necessary  to  clean  the 
sprayer (5) weekly and to change water in the 
tank (2) as often as possible.

 •

If  you  are  not  going  to  use  the  humidifier  for 
a  long  time,  pour  out  water  from  the  tank  (2) 
and the operating chamber of the sprayer (5), 
wash  the  water  tank  (2),  wash  and  clean  the 
operating chamber of the sprayer (5) and the 
sprayer  (5)  itself,  dry  the  unit  thoroughly  and 
take it away for storage.

Weekly care

 •

Once a week wash the water tank (2) and the 
process  chamber  of  the  «sprayer»  (5)  thor-
oughly with neutral detergent solution.

 •

Then rinse them with water carefully.

 •

Add  5-10  drops  of  the  detergent  on  the 
sprayer  (5),  wait  for  about  2-5  minutes. 
Remove  the  deposits  from  the  sprayer  (5) 
surface with a brush.

Note:

 As a cleaning agent for the sprayer (5) you 

can use scale removers for kettles.

 •

Clean  the  air  humidifier  body  (8)  with  a  soft 
slightly damp cloth, and then wipe it dry.

 •

Do  not  immerse  the  air  humidifier  body  (8), 
the power cord and the power plug into water 

IM VT-2334.indd   4

02.12.2016   12:45:20

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-2334 W?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"