VITEK VT-1765 W - Инструкция по эксплуатации - Страница 8

8

 ENGLISH

− 

Before you take the filter-cartridge (5) away for storage, clean and dry it, keep the filter cartridge 
in a cool dark place.

− 

Keep the humidifier in a dry cool place out of reach of children.

TROUBLESHOOTING

Failure Possible 

causes

Troubleshooting

The display is not 
lighting.

No voltage, no power supply

Plug the unit

Plug in another, properly operating 
device, to make sure that the socket 
is in good operating condition.

Power indicator is 
lighting, no “steam” 
formation.

There is no water in the water 
tank.

Fill the water tank with water.

“Steam” has an 
unpleasant  smell 

New device – it is normal

Unscrew the lid of the water tank, 
pour out water and leave the unit for 
12 hours in a cool dark place 

Polluted or stagnant water 

Unplug the unit, remove the water 
tank, pour out water, wash the water 
tank, and fill the water tank with 
boiled or distilled water.

Small intensity of 
“steam” output

Polluted “sprayer”

Unplug the unit and clean the 
sprayer.

Abnormal noise during 
operation of the unit

The unit is placed on the 
uneven or unstable surface

Unplug the unit and even the body 
of the unit or move the humidifier to 
another place.

NOTE:

Non-observance of rules for cleaning the unit from mineral deposits caused by hard water may 
affect the overall performance of the unit. In this case clean the unit, replace the filter-cartridge 
(5) if necessary. If used water is too hard, use household filters to purify water or mix tapping 
water with distilled water in proportion 1:1.

DELIVERY SET

1.  Instruction manual – 1 pc.
2.  Removable nozzle - 1 pc.
3.  Removable water tank lid – 1 pc.
4.  Filter-cartridge – 1 pc.
5.  Remote control 1. pc.
6.  Brush for cleaning – 1 pc.
7. Instruction manual

VT-1765.indd   8

VT-1765.indd   8

29.09.2011   12:33:20

29.09.2011   12:33:20