Stadler Form Lucy L-037 - Инструкция по эксплуатации - Страница 9

• Repairs to electrical appliances must only be carried out by a qualified elec-

trical technician.

• WARNING: Only use the USB cable provided by the manufacturer. Use only 

an external supply with the following specifications: DC 5V/2A.

Setting up / operation

1. Place Lucy in the desired position on a flat surface. Connect the USB-C cable 

(1) to the appliance (2) and connect the cable to a suitable power source (PC, 

external battery, USB socket or to a suitable socket via a power adapter 

with min. 2 A/5 V). When the appliance is used for the first time, the battery 

must be charged by connecting the appliance to a power source for at least 6  

hours. When the battery is fully charged, the status LED light (3) will go out. 

After the battery has been fully charged for the first time, you can operate 

the appliance without the cable using the power from the integrated rechar-

geable battery. A fully charged battery will give the appliance a running time 

of up to 7 h. When the water container is full and the appliance is connected 

to a power source, Lucy can operate for up to 10 h.

2. Remove the lid (10) to fill with water and fragrance.

3. Fill the water container (6) up to the maximum mark (MA X) (7) with water. 

No water may enter the air outlet opening (9). This will damage the appli-

ance and will void any claim to the warranty. 

4. Important: transport the appliance in an upright position and without making 

any jerky movements if there is water in the container (6). If the appliance 

is moved quickly or tilted, water may leak out and run into the electronics