Gorenje H50 - Инструкция по эксплуатации - Страница 27

- 27 -

1.  Fill the water tank directly 

through the water filling 

inlet.

2.  Remove the upper cover 

and fill the water tank.

Purified 

Water

Purified 

Water

Buttons

Function description

On/Off button

After power-up, the appliance can be set to be on/idle. Under normal 

working conditions, briefly press this button to enter the idle status.

Atomization adjustment

When the appliance is operating, the atomization amount can be set to 

three levels (low, medium and high).

Lamp control

Briefly press this button while the appliance is on to switch the light on or 

off.

Timer button

When the appliance is operating, timed shutdown can be set at 1 h, 2 h,  

4 h and 8 h.

The indicator will flash three times, which indicates successful setting.

Humidity setting

The humidity value can be set from 40% to 60%. After the maximum value 

is achieved, press this button again to display F (indicating continuous 

humidification). Press this button again to recover to 40%

Sleep mode

When the sleep mode is activated, the atmosphere lamp is automatically 

turned off. When in sleep mode, press the sleep mode button to exit the 

sleep mode.

INSTRUCTION FOR USE‬

 Notes

•  Please be sure to unplug the power cord before adding water to the appliance.

•  Water level may not exceed the maximum water level mark.

•  Do not pour water into the atomization outlet.

•  Please do not lift the transparent part of the upper end of the water tank by hands 

when the water is added;

•  Please do not add additives like essential oil, perfume, drugs etc. to the water. You 

may add aromatherapy liquid to the built-in aromatherapy box.

•  Please use purified water below 40 °C. Do not use distilled water.

FILLING THE WATER (THREE METHODS)