Увлажнители Elenberg HF-5005 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
MAINTENANCE INSTRUCTIONS
You must clean your device on a
regular basis in order to prevent
bacteria from developing.
Before handling:
- check that the On/Off button
is in the “0” position,
- disconnect the device,
- lift the reservoir by its handle
- turn it over,
- unscrew the cap and pour out
the water.
Before each filling, clean the
ultrasound pellet with a brush
dipped in a glass of white vinegar,
until all white marks disappear.
Empty and clean the device when
not in use, since water should not
remain in the device for more
than 2 days.
TO DISINFECT THE WATER
RESERVOIR
• Remove the anti-scale cartridge
from the cap.
• Pour 2 tablespoons of chlori-
nated water diluted in 3 liters of
water into the reservoir.
Close using the cap without
the cartridge. Allow to rest for 20
minutes.
• Pour out the water and rinse the
reservoir and cap very well, then
wipe with a soft cloth.
• Screw the cap with its anti-
scale cartridge back onto the
reservoir.
TO CLEAN THE WATER RESERVOIR
• Rinse it, then wipe it with a soft
cloth, being careful to dry it com-
pletely.
• Do not use alcohol or solvents.
TO REMOVE SCALE
FROM THE BASE
Since water regularly deposits
in the base, this operation is to be
carried out as soon as white time
marks appear.
• Pour 250 ml of white vinegar
and allow to rest until the lime
has been fully eliminated.
• Rinse using a sponge then wipe
with a soft cloth.
Never place the base under
running water. Never submerge It.
11
